Guidechem | China Chemical Manufacturers,suppliers,B2B Marketplace
  • Products
  • Encyclopedia
  • Buy offers
  • Suppliers
Home>products> Catalyst and Auxiliary > Coating Auxiliary Agents : 6361 Products found filters
< Coating Auxiliary Agents

Coating Auxiliary Agents

Coating Auxiliary Agents, also known as specialized substances added to coatings and paints in small quantities to modify, improve, or enhance various aspects of the coating's performance, application, and properties. These agents play a crucial role in achieving specific desired characteristics and functions in the final coating product. They are not the main components of the coating but rather additives that work in conjunction with the primary ingredients.

Moreover, with the constant saturation of the common coating market, the meager profit, and the continuous improvement of people's living standards, coating manufacturers have begun to produce functional coatings, which has a bright future. 

Coating Auxiliary Agents Categories

Coating auxiliary agents serve as essential components in optimizing the performance and properties of coatings. These agents are broadly classified into two primary categories: oil-based coating additives and water-based coating additives.

Notably, the prevailing drive towards environmental consciousness has spurred remarkable progress in the realm of water-based coating additives. This category encompasses a diverse array of specific agents, each tailored to serve distinct functions within coating formulations. These include:

1. Thickeners: Thickeners are crucial for adjusting the viscosity of coatings, ensuring proper application and adherence to various surfaces.

2. Pigment Dispersants: Pigment dispersants play a pivotal role in evenly distributing pigments within the coating, resulting in enhanced color uniformity and vibrancy.

3. Defoamers: Defoamers effectively mitigate the formation of foam during the manufacturing and application of coatings, thereby enhancing the final finish.

4. Leveling Agents: Leveling agents contribute to achieving a smooth and even surface by minimizing surface tension irregularities and preventing issues like brush marks and orange peel texture.

5. Matting Agents: Matting agents are employed to control the glossiness of coatings, allowing manufacturers to achieve the desired level of sheen or matte finish.

6. Light Stabilizers: Light stabilizers are indispensable for safeguarding coatings against the degrading effects of UV radiation, thereby prolonging the coating's lifespan and maintaining its appearance.

7. Antistatic Agents: Antistatic agents are incorporated to counteract the buildup of static electricity on coated surfaces, which can attract dust and affect overall performance.

Usage of Coating Auxiliary Agents products

Coating auxiliary agents play a pivotal role as indispensable components in the formulation and application of coatings. These agents serve as auxiliary materials that contribute significantly to the entire coating preparation process. 

Their multifaceted benefits encompass improving production workflows, sustaining storage stability, enhancing construction conditions, elevating product quality, and conferring specialized functionalities. 

By seamlessly integrating these auxiliary agents into coating formulations, manufacturers harness their capacity to streamline manufacturing procedures, ensure consistent storage properties, create optimal application environments, elevate the end-product's caliber, and infuse coatings with distinctive attributes that cater to unique requirements. 

Sodium metabisulfite; 7681-57-4 structural formula
Sodium metabisulfite
  • white crystalline powder with a sulfur smell Sodium metabisulfite is a white crystalline powder. Sulfur dioxide odor. It may be considered the anhydride of 2 molecules of sodium disulfite. Sodium metabisulfite occurs as colorless, prismatic crystals or as awhite to creamy-white crystalline powder th..
  • CAS No: 7681-57-4
  • Molecular Weight: 190.095
  • Molecular Formula:Na2O5S2
  • Density:1.48
  • Boiling Point:greater than 302° F (Decomposes) (NIOSH, 2016)
Encyclopedia Safety and Handling MSDS 1024 Suppliers Request For Quotation
Dodecyldimethylbenzylammonium chloride; 139-07-1 structural formula
Dodecyldimethylbenzylammonium chloride
  • Liquid Benzododecinium chloride is the organic chloride salt of benzododecinium. It has antiseptic and disinfectant properties, and used as a preservative in eye drop formulations. It has a role as an antiseptic drug, a disinfectant, an antifouling biocide and a surfactant. It is a quaternary ammoni..
  • CAS No: 139-07-1
  • Molecular Weight: 339.98612
  • Molecular Formula:C21H38ClN
Encyclopedia Safety and Handling MSDS Synthesis Route 260 Suppliers Request For Quotation
Silicon; 7440-21-3 structural formula
  • grey lustrous solid or grey powder Silicon is a nonmetallic element which is known as silicon metal. Not occur freely in nature, but is found in silicon dioxide (silica) and in various silicates. It is a steel-gray crystalline solid or a black-brown amorphous material.
  • CAS No: 7440-21-3
  • Molecular Weight: 28.0855
  • Molecular Formula:Si
  • Density:2.33
  • Boiling Point:2355℃
  • Flash Point:°C
Encyclopedia Safety and Handling MSDS Synthesis Route 187 Suppliers Request For Quotation
Sodium thiocyanate; 540-72-7 structural formula
Sodium thiocyanate
  • CAS No: 540-72-7
  • Molecular Weight: 81.07217
  • Molecular Formula:CNNaS
  • Density:1.295?g/mL?at 20?°C
Encyclopedia Safety and Handling MSDS NMR Spectrum Synthesis Route 310 Suppliers Request For Quotation
Coconut oil monoethanolamide; 68140-00-1 structural formula
Coconut oil monoethanolamide
  • CAS No: 68140-00-1
  • Molecular Weight: 243.3856
  • Molecular Formula:C14H29NO2
  • Density:0.9±0.1 g/cm3
  • Boiling Point:410.7±28.0 °C at 760 mmHg
  • Flash Point:202.2±24.0 °C
Encyclopedia Safety and Handling 122 Suppliers Request For Quotation
p-Toluenesulfonamide; 70-55-3 structural formula
  • White leaflets. Soluble inalcohol; very slightly soluble inwater.Combustible.
  • CAS No: 70-55-3
  • Molecular Weight: 171.214
  • Molecular Formula:C7H9NO2S
  • Density:1.271 g/cm3
  • Boiling Point:221℃ (10 mmHg)
  • Flash Point:202°C c.c.
Encyclopedia Safety and Handling MSDS NMR Spectrum Synthesis Route 271 Suppliers Request For Quotation
3,5-Dimethylphenol; 108-68-9 structural formula
  • CAS No: 108-68-9
  • Molecular Weight: 122.1644
  • Molecular Formula:C8H10O
  • Density:0.968
  • Boiling Point:222℃
  • Flash Point:109℃
Encyclopedia Safety and Handling MSDS NMR Spectrum 121 Suppliers Request For Quotation
Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide; 75980-60-8 structural formula
Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide
  • white or cream powder
  • CAS No: 75980-60-8
  • Molecular Weight: 348.37
  • Molecular Formula:C22H21O2P
  • Density:1.12 g/mL at 25 °C(lit.)
  • Boiling Point:519.6 °C at 760 mmHg
  • Flash Point:>230 °F
Encyclopedia Safety and Handling MSDS NMR Spectrum Synthesis Route 226 Suppliers Request For Quotation
Copper(I) chloride; 7758-89-6 structural formula
Copper(I) chloride
  • white or pale grey powder Copper chloride is a brownish-yellow powder. DryPowder; Liquid Copper(I) chloride is an inorganic chloride of copper in which the metal is in the +1 oxidation state. It has a role as a molluscicide and an agrochemical. It is an inorganic chloride and a copper molecular enti..
  • CAS No: 7758-89-6
  • Molecular Weight: 98.996
  • Molecular Formula:ClCu
  • Density:4.14
  • Boiling Point:1490℃
  • Flash Point:1490 °C
Encyclopedia Safety and Handling MSDS Synthesis Route 253 Suppliers Request For Quotation
1,2-Bis(pentabromophenyl) ethane; 84852-53-9 structural formula
1,2-Bis(pentabromophenyl) ethane
  • Decabromodiphenyl ethane is a powder with a high molecular weight, very low water solubility, and low lipophilicity (as indicated by log Kow). The particles are <15 μm in diameter, and thus, this substance is expected to be respirable after inhalation exposure.
  • CAS No: 84852-53-9
  • Molecular Weight: 441.7837
  • Molecular Formula:C14H4Br10
  • Density:2.816
  • Boiling Point:676.2oC at 760 mmHg
  • Flash Point:346.6oC
Encyclopedia Safety and Handling MSDS 233 Suppliers Request For Quotation
Polyalkyleneoxide modified heptamethyltrisiloxane; 27306-78-1 structural formula
Polyalkyleneoxide modified heptamethyltrisiloxane
  • Polyalkyleneoxide modified heptamethyltrisiloxane can improve the prevention effect of pesticides and reduce the spray volume. It is used in the fields of pesticides herbicides, insecticides, acaricides, fungicides, plant growth regulating agents, and other aspects.(Polyalkyleneoxide modified heptam..
  • CAS No: 27306-78-1
  • Molecular Weight: 338.66300
  • Molecular Formula:C13H34O4Si3
  • Density:1.035 g/cm3
  • Boiling Point:200 13mm
  • Flash Point:200 13mm
Encyclopedia Safety and Handling MSDS 47 Suppliers Request For Quotation
Epoxidized soya bean oil; 8013-07-8 structural formula
Epoxidized soya bean oil
  • Iodine number maximum of 6, oxirane oxygen minimum of 6.0%. Epoxidized vegetable oils is an odorless pale yellow oily liquid. Floats on water. (USCG, 1999)|Liquid; OtherSolid; PelletsLargeCrystals Epoxidized vegetable oils is an odorless pale yellow oily liquid. Floats on water. (USCG, 1999)
  • CAS No: 8013-07-8
  • Molecular Weight: 975.399
  • Molecular Formula:C57H98O12
  • Density:0.997
  • Boiling Point:Very high (USCG, 1999)
  • Flash Point:585° F (USCG, 1999)
Encyclopedia Safety and Handling MSDS 175 Suppliers Request For Quotation
Carbon disulfide; 75-15-0 structural formula
Carbon disulfide
  • Carbon disulfide (carbon bisulfide; CS2; CASRN 75-15-0), in its pure form is a colorless liquid that evaporates readily at room temperature, with a sweet aromatic odor similar to that of chloroform. In its impure commercial and reagent form, however, carbon disulfide is a yellowish liquid with a fou..
  • CAS No: 75-15-0
  • Molecular Weight: 76.1407
  • Molecular Formula:CS2
  • Density:1.262
  • Boiling Point:46℃
  • Flash Point:-30℃
Encyclopedia Safety and Handling MSDS NMR Spectrum 113 Suppliers Request For Quotation
Terephthalaldehyde; 623-27-8 structural formula
  • CAS No: 623-27-8
  • Molecular Weight: 134.134
  • Molecular Formula:C8H6O2
  • Density:1.189
  • Boiling Point:245-248℃
  • Flash Point:76℃
Encyclopedia Safety and Handling MSDS NMR Spectrum Synthesis Route 229 Suppliers Request For Quotation
Dimethyloldimethyl hydantoin; 6440-58-0 structural formula
Dimethyloldimethyl hydantoin
  • Liquid
  • CAS No: 6440-58-0
  • Molecular Weight: 188.18118
  • Molecular Formula:C7H12N2O4
  • Density:1.349
  • Boiling Point:303.7 oC at 760 mmHg
  • Flash Point:137.5 oC
Encyclopedia Safety and Handling MSDS NMR Spectrum 166 Suppliers Request For Quotation
2,5-Di-tert-butylhydroquinone; 88-58-4 structural formula
  • cream or pale brown solid PelletsLargeCrystals 2,5-di-tert-butylbenzene-1,4-diol is a member of the class of hydroquinones that is benzene-1,4-diol substituted by tert-butyl groups at position 2 and 5.
  • CAS No: 88-58-4
  • Molecular Weight: 222.32328
  • Molecular Formula:C14H22O2
  • Density:1.012
  • Boiling Point:321°C
  • Flash Point:216℃
Encyclopedia Safety and Handling MSDS NMR Spectrum Synthesis Route 167 Suppliers Request For Quotation
3-Chloropropyltriethoxysilane; 5089-70-3 structural formula
  • Colorless transparent liquid Liquid
  • CAS No: 5089-70-3
  • Molecular Weight: 240.79974
  • Molecular Formula:C9H21ClO3Si
  • Density:1
  • Boiling Point:100℃(10 torr)
  • Flash Point:99?
Encyclopedia Safety and Handling MSDS Synthesis Route 168 Suppliers Request For Quotation
DIMETHYLTIN DICHLORIDE; 753-73-1 structural formula
  • white crystalline powder Liquid
  • CAS No: 753-73-1
  • Molecular Weight: 219.68
  • Molecular Formula:C2H6Cl2Sn
  • Density:1,397
  • Boiling Point:185℃
  • Flash Point:28.8 °C
Encyclopedia Safety and Handling MSDS NMR Spectrum Synthesis Route 68 Suppliers Request For Quotation
Sodium edetate; 64-02-8 structural formula
Sodium edetate
  • White powder. Freely soluble in water. Tetrasodium EDTA is a white crystalline solid.
  • CAS No: 64-02-8
  • Molecular Weight: 380.17
  • Molecular Formula:C10H12N2Na4O8
  • Density:Apparent density: 6.9 lb/gallon
  • Boiling Point:614.2ºC at 760 mmHg
  • Flash Point:325.2ºC
Encyclopedia Safety and Handling MSDS Synthesis Route 214 Suppliers Request For Quotation
N-Vinyl-2-pyrrolidone; 88-12-0 structural formula
  • Colorless liquid. Combustible.
  • CAS No: 88-12-0
  • Molecular Weight: 111.14176
  • Molecular Formula:C6H9NO
  • Density:1.043
  • Boiling Point:90-92℃ (9.7513 mmHg)
  • Flash Point:95℃
Encyclopedia Safety and Handling MSDS NMR Spectrum Synthesis Route 220 Suppliers Request For Quotation
<Pre12345..100Next >