Guidechem | China Chemical Manufacturers,suppliers,B2B Marketplace
Products
  • Products
  • Encyclopedia
  • Buy offers
  • Suppliers
Home>products> Polymer > Synthetic Rubber : 53 Products found filters
Categories
< Polymer
< Synthetic Rubber

Synthetic Rubber

Synthetic Rubber, also known as synthetic elastomer, is a highly elastic synthetic polymer. It is one of the three major synthetic materials, and its output is only lower than that of synthetic resin (or plastic) and synthetic fiber. Its properties vary with different monomers, and the properties of a few varieties are similar to those of natural rubber. The properties of a few varieties of synthetic rubber are similar to those of natural rubber, and most of them are different from natural rubber, but both of them are highly elastic polymer materials, which generally need to be vulcanized and processed before they have practicability and application value. Generally speaking, the price of natural rubber is more expensive, so in order to reduce the cost, low-cost synthetic rubber is widely used, with excellent heat resistance, cold resistance, corrosion resistance, insulation, air tightness and so on. it can be used normally between minus 60 degrees and 250 degrees, but the tensile effect of synthetic rubber is poor, anti-tear strength and mechanical properties are also relatively poor. It is widely used in industry and agriculture, national defense, transportation and daily life.

According to the state of the finished product, synthetic rubber can be divided into liquid rubber, solid rubber, latex, powder rubber, etc.; according to the formation process can be divided into thermoplastic rubber, vulcanized rubber, most synthetic rubber belongs to vulcanized rubber; according to the use characteristics can be divided into general-purpose rubber and special rubber. Universal rubber refers to the rubber that can partially or completely replace natural rubber, mainly used in the manufacture of tires and general industrial rubber products, with great demand, such as styrene-butadiene rubber, cis-polybutadiene rubber and so on. special rubber is a kind of rubber with the characteristics of high temperature resistance, ozone resistance and aging resistance. it is used for special occasions that require certain characteristics, such as silicone rubber.

Transportation, coal, electricity and other factors will promote the development of the rubber industry. in the future, the market requirements for the quality and service of synthetic rubber products will be further improved, which will promote the development of China's synthetic rubber industry to higher requirements.

+more
POLY(PROPYLENE-CO-ETHYLENE); 9010-79-1 structural formula
POLY(PROPYLENE-CO-ETHYLENE)
  • solid
  • CAS No: 9010-79-1
  • Molecular Weight: 210.4
  • Molecular Formula:C5H10
  • Density:0.9?g/mL?at 25?°C(lit.)
  • Boiling Point:14.9°Cat760mmHg
  • Flash Point:°C
Encyclopedia Safety and Handling MSDS 25 Suppliers Request For Quotation
1,2-(Methylenedioxy)-4-nitrobenzene; 2620-44-2 structural formula
1,2-(Methylenedioxy)-4-nitrobenzene
  • yellow fine crystalline powder
  • CAS No: 2620-44-2
  • Molecular Weight: 167.12
  • Molecular Formula:C7H5NO4
  • Density:1.486
  • Boiling Point:278.1 oC at 760 mmHg
  • Flash Point:142℃
Encyclopedia Safety and Handling MSDS NMR Spectrum Synthesis Route 61 Suppliers Request For Quotation
Perfluoroethylene propylene copolymer; 25067-11-2 structural formula
Perfluoroethylene propylene copolymer
  • Perfluoroethylene propylene copolymer can be used in wire and cable insulation, pipe linings, lining for processing equipment. Fibers are used for filtration screening and mist separators.
  • CAS No: 25067-11-2
  • Molecular Weight: 250.04
  • Molecular Formula:C5F10
Encyclopedia Safety and Handling 49 Suppliers Request For Quotation
Styrene Butadiene Rubber; 9003-55-8 structural formula
Styrene Butadiene Rubber
  • solid or viscous liquid, depending upon the degree of polymerisation
  • CAS No: 9003-55-8
  • Molecular Weight: 474.72
  • Molecular Formula:C25H21F3N6O2S
  • Density:1.04 g/mL at 25 °C
  • Boiling Point:145.2 °C at 760 mmHg
  • Flash Point:31.1 °C
Encyclopedia Safety and Handling MSDS 202 Suppliers Request For Quotation
POLYSTYRENE-BLOCK-POLYISOPRENE-BLOCK-POLYSTYRENE; 25038-32-8 structural formula
POLYSTYRENE-BLOCK-POLYISOPRENE-BLOCK-POLYSTYRENE
  • Components of hot melt adhesives, sealants, asphalt and oil gels.?Used as a regulator for polymer, thermosetting materials and general rubber formulations.?Directly molded or extruded automotive parts, sporting goods, work shoes and films.
  • CAS No: 25038-32-8
  • Molecular Weight: 172.26614
  • Molecular Formula:C13H16
  • Density:0.93 g/mL at 25 °C
  • Boiling Point:145.2 °C at 760 mmHg
  • Flash Point:31.1 °C
Encyclopedia Safety and Handling MSDS 45 Suppliers Request For Quotation
orthoplast; 64706-29-2 structural formula
orthoplast
  • CAS No: 64706-29-2
  • Molecular Weight:
  • Molecular Formula:
Encyclopedia Safety and Handling 16 Suppliers Request For Quotation
POLYSTYRENE-BLOCK-POLY(ETHYLENE-RAN-BUTYLENE)-BLOCK-POLYSTYRENE; 66070-58-4 structural formula
POLYSTYRENE-BLOCK-POLY(ETHYLENE-RAN-BUTYLENE)-BLOCK-POLYSTYRENE
  • Components of hot melt adhesives, sealants, asphalt and oil gels.?Used as a regulator for polymer, thermosetting materials and general rubber formulations.?Directly molded or extruded automotive parts, sporting goods, work shoes and films.
  • CAS No: 66070-58-4
  • Molecular Weight: 158.24000
  • Molecular Formula:C12H14
  • Density:0.91 g/mL at 25ºC(lit.)
  • Boiling Point:145.2ºC at 760 mmHg
  • Flash Point:31.1ºC
Encyclopedia Safety and Handling MSDS 50 Suppliers Request For Quotation
Rosin; 8050-09-7 structural formula
Rosin
  • solid with a slight odour of turpentine
  • CAS No: 8050-09-7
  • Molecular Weight: 302.5
  • Molecular Formula:C20H30O2
  • Density:1,07 g/cm3
  • Boiling Point:439.5°Cat760mmHg
  • Flash Point:180°C
Encyclopedia Safety and Handling MSDS 653 Suppliers Request For Quotation
POLY(EPICHLOROHYDRIN-CO-ETHYLENE OXIDE); 24969-10-6 structural formula
POLY(EPICHLOROHYDRIN-CO-ETHYLENE OXIDE)
  • CAS No: 24969-10-6
  • Molecular Weight: 136.575
  • Molecular Formula:C5H9ClO2
  • Density:1.32 g/mL at 25 °C(lit.)
  • Boiling Point:116.1°C at 760 mmHg
  • Flash Point:33.9°C
Encyclopedia Safety and Handling 5 Suppliers Request For Quotation
N-Fmoc-L-threonol; 176380-53-3 structural formula
N-Fmoc-L-threonol
  • CAS No: 176380-53-3
  • Molecular Weight: 327.38
  • Molecular Formula:C19H21NO4
  • Density:1.259
  • Boiling Point:586.5°Cat760mmHg
  • Flash Point:308.5°C
Encyclopedia Safety and Handling MSDS 71 Suppliers Request For Quotation
N-Isopropyl-N'-phenyl-1,4-phenylenediamine; 101-72-4 structural formula
N-Isopropyl-N'-phenyl-1,4-phenylenediamine
  • DARK GREY-TO-BLACK FLAKES.
  • CAS No: 101-72-4
  • Molecular Weight: 226.31682
  • Molecular Formula:C15H18N2
  • Density:1.086
  • Boiling Point:161℃
  • Flash Point:230.9 °C
Encyclopedia Safety and Handling MSDS NMR Spectrum 211 Suppliers Request For Quotation
POLY(ETHYLENE); 68037-39-8 structural formula
POLY(ETHYLENE)
  • light yellow waxy solid
  • CAS No: 68037-39-8
  • Molecular Weight: 28.05316
  • Molecular Formula:C2H4
  • Density:0.482
  • Boiling Point:-102.4 deg C at 700 mm Hg
  • Flash Point:-213 °F (approx.) (USCG, 1999)
Encyclopedia Safety and Handling 27 Suppliers Request For Quotation
NYLON 11; 25587-80-8 structural formula
NYLON 11
  • nylon 11 is a bulking agent used primarily in makeup preparations and in some moisturizers. NYLON 11Supplier
  • CAS No: 25587-80-8
  • Molecular Weight: 201.31
  • Molecular Formula:C11H23NO2
  • Density:1.026 g/mL at 25 °C(lit.)
  • Boiling Point:334.9 oC at 760 mmHg
  • Flash Point:156.3 oC
Encyclopedia Safety and Handling MSDS 5 Suppliers Request For Quotation
PSEUDOLARIC ACID B; 82508-31-4 structural formula
PSEUDOLARIC ACID B
  • Pseudolaric Acid B is a diterpene isolated from the root of Pseudolarix kaempferi Gorden (pinaceae), has anti-cancer, antifungal, and antifertile activities, and shows immunosuppressive activity on T lymphocytes[1][2][3]. Pseudolaric Acid B inhibits hepatitis B virus (HBV) secretion through apoptosi..
  • CAS No: 82508-31-4
  • Molecular Weight: 432.469
  • Molecular Formula:C23H28O8
  • Density:1.29
  • Boiling Point:613.8°C at 760 mmHg
  • Flash Point:208.8°C
Encyclopedia Safety and Handling MSDS Synthesis Route 68 Suppliers Request For Quotation
Zinc oxide; 1314-13-2 structural formula
Zinc oxide
  • White, odorless solid.
  • CAS No: 1314-13-2
  • Molecular Weight: 81.4084
  • Molecular Formula:OZn
  • Density:5.6
  • Boiling Point:2360℃
  • Flash Point:1436
Encyclopedia Safety and Handling MSDS 2219 Suppliers Request For Quotation
1,3,5-Tri-2-propenyl-1,3,5-triazine-2,4,6(1H,3H,5H)-trione; 1025-15-6 structural formula
1,3,5-Tri-2-propenyl-1,3,5-triazine-2,4,6(1H,3H,5H)-trione
  • colourless viscous liquid or white powderWhite crystalline solid.
  • CAS No: 1025-15-6
  • Molecular Weight: 249.27
  • Molecular Formula:C12H15N3O3
  • Density:1.159 g/mL at 25 °C(lit.)
  • Boiling Point:149-152 °C4 mm Hg(lit.)
  • Flash Point:>230 °F
Encyclopedia Safety and Handling MSDS NMR Spectrum Synthesis Route 190 Suppliers Request For Quotation
Polyethylene; 9002-88-4 structural formula
Polyethylene
  • solid; appearance depends upon method of forming; Chemical and physical properties are markedly affected byincreasing density, which is affected by the shape and spacingof the molecular chain. Low-density materials have highlybranched and widely spaced chains, whereas high-densitymaterials have comp..
  • CAS No: 9002-88-4
  • Molecular Weight: 28.054
  • Molecular Formula:C2H4
  • Density:0.95
  • Boiling Point:-272.4° F (USCG, 1999)
  • Flash Point:-213° F (approx.) (USCG, 1999)
Encyclopedia Safety and Handling MSDS 1030 Suppliers Request For Quotation
ACRYLONITRILE/BUTADIENE COPOLYMER; 9003-18-3 structural formula
ACRYLONITRILE/BUTADIENE COPOLYMER
  • NBR is important for its high oil and temperature resistance.Flexibility at very low temperatures is obtained with loweracrylonitrile content: in turn, this sacrifices some oil resistance.Low-temperature flexibility for some applications canbe modified by plasticizers or blends. Additional propertie..
  • CAS No: 9003-18-3
  • Molecular Weight: 321.46
  • Molecular Formula:C7H9N
  • Density:1?g/mL?at 25?°C
Encyclopedia Safety and Handling MSDS 45 Suppliers Request For Quotation
Polychloroprene; 9010-98-4 structural formula
Polychloroprene
  • Polychloroprene was discovered in 1930 at E. I. DuPont de Nemours & Co. inWilmington Delaware. The discovery grew out of a need to develop a synthetic substitute for natural rubber. DuPont first marketed this first commercially successful synthetic elastomer as DuPrene in 1933. In response to new te..
  • CAS No: 9010-98-4
  • Molecular Weight: 88.534
  • Molecular Formula:C4H5Cl
  • Density:0.922
  • Boiling Point:-202° F (NTP, 1992)
  • Flash Point:-4° F (NTP, 1992)
Encyclopedia Safety and Handling MSDS NMR Spectrum Synthesis Route 138 Suppliers Request For Quotation
1,1,5,5-tetramethyl-3,3-diphenyltrisiloxane; 17875-55-7 structural formula
1,1,5,5-tetramethyl-3,3-diphenyltrisiloxane
  • CAS No: 17875-55-7
  • Molecular Weight: 330.60118
  • Molecular Formula:C16H22O2Si3
  • Density:0.9936
  • Boiling Point:292.1°Cat760mmHg
  • Flash Point:130.5°C
Encyclopedia Safety and Handling MSDS 49 Suppliers Request For Quotation
<Pre123Next >