Products
  • Products
  • Cas lib
  • Buy offers
  • Encyclopedia
  • Msds lib
  • Synthesis
  • Reach Info
  • Suppliers
Home> Hot Product Listed S   > sodium lignosulfon-ate

sodium lignosulfon-ate

CAS No.:8061-51-6
Molecular Weight:41.988173
Molecular Formula:C20H24Na2O10S2 (Products with the same molecular formula)
Names and Identifiers
Synonyms

sodium lignosulfon-ateSodium Ligninsulfonate

Inchi
InChI=1S/FH.Na/h1H;/q;+1/p-1
InChkey
PUZPDOWCWNUUKD-UHFFFAOYSA-M
Canonical Smiles
[F-].[Na+]
Properties
Appearance
brown powder
Melting Point
993 deg C
Boiling Point
1704 deg C
Water
soluble
Solubilities
soluble Appearance:brown powder
Transport Information:25kgs
particular:particular
Color/Form
Colorless, cubic or tetragonal crystals
White powder or colorless crystals [Note: Pesticide grade is often dyed blue].
Spectral properties
INDEX OF REFRACTION: 1.336
Safety and Handling
Safety Statements
S24/25
Safety

Safety Statements: 24/25
S24/25:Avoid contact with skin and eyes.
WGK Germany: 1
RTECS: OI6174000
A poison by intraperitoneal route. Moderately toxic by intravenous route. Low toxicity by ingestion. Mutation data reported. When heated to decomposition it emits acrid smoke and irritating vapors.

Skin, Eye, and Respiratory Irritations
Dust inhalation and skin or eye contact may cause irritation of the skin, eyes or respiratory tract ...
Cleanup Methods
Environmental considerations-land spill: Dig a pit, pond, lagoon, holding area to contain liquid or solid material; /SRP: If time permits, pits, ponds, lagoons, soak holes, or holding areas should be sealed with an impermeable flexible membrane liner./ Cover solids with a plastic sheet to prevent dissolving in rain or fire fighting water. /Sodium fluoride solution/
Environmental considerations-water spill: Neutralize with agricultural lime (CaO), crushed limestone (CaCO3) or sodium bicarbonate (NaHCO3). Adjust pH to neutral (pH= 7). /Sodium fluoride solution/
Shovel into suitable dry container. Control runoff and isolate discharged material for proper disposal.
Transport
25kgs
Fire Fighting Procedures
Extinguish fire using agent suitable for type of surrounding fire (material itself does not burn or burns with difficulty). Use water in flooding quantities as fog; Cool all affected containers with flooding quantities of water; Apply water from as far a distance as possible. /Sodium fluoride solution/
If material involved in fire: Extinguish fire using agent suitable for type of surrounding fire (Material itself does not burn or burns with difficulty.) Use water in flooding quantities as fog. Use "alcohol" foam, dry chemical or carbon dioxide.
Fire Potential
Not combustible.
Formulations/Preparations
Commercial grade (purity 93-99%) is used to prepare baits
Technical grades are 90% and 95% NaF, light (37 cu in/lb) and dense (23 cu in/lb), and 98%
Sodium fluoride solution contains not less than 95% and not more than 105.0% of the labelled amount of sodium fluoride, USP XXI
The purity of the commercial material is about 98%
Commercially available as tablets or solutions for oral admin and in dentifrices or as oral gels, pastes, or rinsing solutions for topical administration.
Oral, Topical Use Only: Cream 1.1% (0.5% fluoride ion) Control Rx, Omnii International PreviDent 5000 Plus, (Colgate Oral), SF 5000 Plus, Cypress Foam Sodium Fluoride 2% (0.9% fluoride ion) Neutra-Foam, (Oral-B) Gel 1.1% (0.5% fluoride ion) (Karigel), Maintenance-Neutral, (Young Dental), NeutraCare, (Oral-B), PreviDent Brush-On Gel ( with parabens), (Colgate) Oral SF Gel, Cypress Thera-Flur-N Gel-Drops ( with parabens), (Colgate) Oral Rinsing solution 0.05% (0.02% fluoride ion) ACT, (Johnson & Johnson) Fluorigard Anti-Cavity Dental Rinse ( with alcohol 6%, glycerin 15%, and tartrazine), (Colgate) Oral 0.2% (0.09% fluoride ion) Fluorinse ( with parabens), (Oral-B) PreviDent Dental Rinse ( with alcohol 5.8% and glycerin), (Colgate Oral).
Oral: Solution: 1.1 mg/mL (0.5 mg of fluoride ion per mL) Luride Drops ( with parabens and propylene glycol), (Colgate) Oral Pediaflor Drops ( with alcohol
Trade names for sodium fluoride include Floridine, Florocid, Flura-Drops, Karidium, Pergantine, T-Fluoride, and Villiaumite.
DOT Emergency Guidelines
/GUIDE 154: SUBSTANCES - TOXIC AND/OR CORROSIVE (NON-COMBUSTIBLE)/ Health: TOXIC; inhalation, ingestion, or skin contact with material may cause severe injury or death. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution.
/GUIDE 154: SUBSTANCES - TOXIC AND/OR CORROSIVE (NON-COMBUSTIBLE)/ Fire or Explosion: Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes. Some are oxidizers and may ignite combustibles (wood, paper, oil, clothing, etc.). Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated.
/GUIDE 154: SUBSTANCES - TOXIC AND/OR CORROSIVE (NON-COMBUSTIBLE)/ Public Safety: CALL Emergency Response Telephone Number ... . As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. Keep unauthorized personnel away. Stay upwind. Keep out of low areas. Ventilate enclosed areas.
/GUIDE 154: SUBSTANCES - TOXIC AND/OR CORROSIVE (NON-COMBUSTIBLE)/ Protective Clothing: Wear positive pressure self-contained breathing apparatus (SCBA). Wear chemical protective clothing that is specifically recommended by the manufacturer. It may provide little or no thermal protection. Structural firefighters' protective clothing provides limited protection in fire situations ONLY; it is not effective in spill situations where direct contact with the substance is possible.
/GUIDE 154: SUBSTANCES - TOXIC AND/OR CORROSIVE (NON-COMBUSTIBLE)/ Evacuation: ... Fire: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions.
/GUIDE 154: SUBSTANCES - TOXIC AND/OR CORROSIVE (NON-COMBUSTIBLE)/ Fire: Small fires: Dry chemical, CO2 or water spray. Large fires: Dry chemical, CO2, alcohol-resistant foam or water spray. Move containers from fire area if you can do it without risk. Dike fire control water for later disposal; do not scatter the material. Fire involving tanks or car/trailer loads: Fight fire from maximum distance or use unmanned hose holders or monitor nozzles. Do not get water inside containers. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks engulfed in fire.
/GUIDE 154: SUBSTANCES - TOXIC AND/OR CORROSIVE (NON-COMBUSTIBLE)/ Spill or Leak: ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. DO NOT GET WATER INSIDE CONTAINERS.
/GUIDE 154: SUBSTANCES - TOXIC AND/OR CORROSIVE (NON-COMBUSTIBLE)/ First Aid: Move victim to fresh air. Call 911 or emergency medical service. Give artificial respiration if victim is not breathing. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Administer oxygen if breathing is difficult. Remove and isolate contaminated clothing and shoes. In case of contact with substance, immediately flush skin or eyes with running water for at least 20 minutes. For minor skin contact, avoid spreading material on unaffected skin. Keep victim warm and quiet. Effects of exposure (inhalation, ingestion or skin contact) to substance may be delayed. Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves.
Exposure Standards and Regulations
The Approved Drug Products with Therapeutic Equivalence Evaluations List identifies currently marketed over-the-counter drug products, incl sodium fluoride, approved on the basis of safety and effectiveness by FDA under sections 505 of the Federal Food, Drug, and Cosmetic Act.
Reactivities and Incompatibilities
Strong oxidizers.
Reacts with acids to form hydrogen fluoride.
Other Preventative Measures
If material not involved in fire: Keep material out of water sources and sewers; Build dikes to contain flow as necessary. /Sodium fluoride solution/
Personnel protection: Keep upwind. ... Avoid breathing vapors. Wash away any material which may have contacted the body with copious amounts of water or soap and water. /Sodium fluoride solution/
SRP: The scientific literature for the use of contact lenses in industry is conflicting. The benefit or detrimental effects of wearing contact lenses depend not only upon the substance, but also on factors including the form of the substance, characteristics and duration of the exposure, the uses of other eye protection equipment, and the hygiene of the lenses. However, there may be individual substances whose irritating or corrosive properties are such that the wearing of contact lenses would be harmful to the eye. In those specific cases, contact lenses should not be worn. In any event, the usual eye protection equipment should be worn even when contact lenses are in place.
The worker should immediately wash the skin when it becomes contaminated.
Work clothing that becomes wet or significantly contaminated should be removed and replaced.
Workers whose clothing may have become contaminated should change into uncontaminated clothing before leaving the work premises.
SRP: Contaminated protective clothing should be segregated in such a manner so that there is no direct personal contact by personnel who handle, dispose, or clean the clothing. Quality assurance to ascertain the completeness of the cleaning procedures should be implemented before the decontaminated protective clothing is returned for reuse by the workers. Contaminated clothing should not be taken home at end of shift, but should remain at employee's place of work for cleaning.
Protective Equipment and Clothing
Wear special protective clothing and positive pressure self-contained breathing apparatus.
Wear appropriate chemical protective gloves, and boots. /Sodium fluoride solution/
Wear appropriate personal protective clothing to prevent skin contact.
Wear appropriate eye protection to prevent eye contact.
Respirator Recommendations: Up to 12.5 mg/cu m: (Assigned Protection Factor = 5) Any quarter-mask respirator.
Respirator Recommendations: Up to 25 mg/cu m: (Assigned Protection Factor = 10) Any particulate respirator equipped with an N95, R95, or P95 filter (including N95, R95, and P95 filtering facepieces) except quarter-mask respirators. The following filters may also be used: N99, R99, P99, N100, R100, P100. Substance reported to cause eye irritation or damage; may require eye protection./(Assigned Protection Factor = 10) Any supplied-air respirator. Substance reported to cause eye irritation or damage; may require eye protection.
Respirator Recommendations: Up to 62.5 mg/cu m: (Assigned Protection Factor = 25) Any supplied-air respirator operated in a continuous-flow mode. Substance reported to cause eye irritation or damage; may require eye protection./(Assigned Protection Factor = 25) Any powered air-purifying respirator with a high-efficiency particulate filter. Substance reported to cause eye irritation or damage; may require eye protection. May need acid gas sorbent.
Respirator Recommendations: Up to 125 mg/cu m: (Assigned Protection Factor = 50) Any air-purifying, full-facepiece respirator with an N100, R100, or P100 filter. May need acid gas sorbent./(Assigned Protection Factor = 50) Any self-contained breathing apparatus with a full facepiece./(Assigned Protection Factor = 50) Any supplied-air respirator with a full facepiece.
Respirator Recommendations: Up to 250 mg/cu m: (Assigned Protection Factor = 2000) Any supplied-air respirator that has a full facepiece and is operated in a pressure-demand or other positive-pressure mode.
Respirator Recommendations: Emergency or planned entry into unknown concentrations or IDLH conditions: (Assigned Protection Factor = 10,000) Any self-contained breathing apparatus that has a full facepiece and is operated in a pressure- demand or other positive-pressure mode./(Assigned Protection Factor = 10,000) Any supplied-air respirator that has a full facepiece and is operated in a pressure-demand or other positive-pressure mode in combination with an auxiliary self-contained positive-pressure breathing apparatus.
Respirator Recommendations: Escape: (Assigned Protection Factor = 50) Any air-purifying, full-facepiece respirator with an N100, R100, or P100 filter. May need acid gas sorbent./Any appropriate escape-type, self-contained breathing apparatus.
Specification

? Sodium lignosulfonate , with CAS number of 8061-51-6, can be called AS 3 (dispersant) ; Borresperse N ; Borresperse NA ; BorresperseNA-SA ; Borresperse NaI 50 ; Diwatex 30FKP ; HR5 (cement additive) ; Kraftsperse EDF 450 ; Lignopol ; Lignosol NSX 110 ; M 10 (lignosulfonate) ; Neocobaltin PNA 11 ; Newkalgen RX-B ; Polyfon Hun ; Reax 83A ; Reax 85C ; Sanekis P 550 ; San-X P 252 ; Sodium lignosulfite ; Sodium lignosulfonate ; Sodiumlignosulfonic acid ; Sulfonated lignin sodium salt . It is soluble in water with the release of hydrogen ions. The resulting solutions have pH of less than 7.0. Materials in this group react with chemical bases (for example: amines and inorganic hydroxides) to form salts. These neutralization reactions occur as the base accepts hydrogen ions that the acid donates. Neutralizations can generate dangerously large amounts of heat in small spaces. The dissolution of acids in water or the dilution of their concentrated solutions with water may generate significant heat. The addition of water acids often generates sufficient heat in the small region of mixing to boil some of the water explosively. The resulting "bumping" spatters acid widely. These materials have significant ability as oxidizing agents, but that ability varies (for example, from high for nitric acid to low for sulfuric acid and most sulfonic acids). They can react with active metals, including iron and aluminum, and also many less active metals, to dissolve the metal and liberate hydrogen and/or toxic gases. Like other acids, materials in this group can initiate polymerization in certain classes of organic compounds. Their reactions with cyanide salts and compounds release gaseous hydrogen cyanide. Flammable and/or toxic gases are also often generated by their reactions with dithiocarbamates, isocyanates, mercaptans, nitrides, nitriles, sulfides, and weak or strong reducing agents. Additional gas-generating reactions occur with sulfites, nitrites, thiosulfates (to give H2S and SO3), dithionites (SO2) and even carbonates: the carbon dioxide gas from the last is nontoxic but the heat and spattering from the reaction can be troublesome. Acids often catalyze (increase the rate of) chemical reactions.

Report

Reported in EPA TSCA Inventory.

Disposal Methods
SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational exposure or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal, aquatic, and plant life; and conformance with environmental and public health regulations.
Group III Containers (both combustible and non-combustible) that previously held organic mercury, lead, cadmium, arsenic, or inorganic pesticides should be triple rinsed, punctured and disposed of in a sanitary landfill. Non-rinsed containers should be encapsulated and buried at a specially designated landfill site. /Organic mercury, lead, cadmium, arsenic, or inorganic pesticides/
A suggested disposal method converts the soluble fluoride ions to insoluble calcium fluoride ... a naturally occurring mineral (fluorspar) which can safely be added to a landfill. The method is as follows: add slowly to a large container of water. Stir in slight excess of Na2CO3 /sodium carbonate/. If fluoride is present add Ca(OH)2 /calcium hydroxide/ also. Let stand 24 hr. Decant or siphon into another container and neutralize with 6 m HCl /hydrochloric acid/ before washing down with large cxcess of water. The sludge may be added to landfill. Recommendable methods: Precipitation & landfill.
Precipitation & landfill: Industry wastes with a high fluoride concn are treated in two phases. By adding CaO /calcium oxide/, the soluble fluorides are precipitated as CaF2 /calcium fluoride/ until the concn has been reduced to 10 mg/l. The compact sludge is disposed of on special waste dumps.
Reach Info
Globally, no enterprise has officially registered the substance REACH.
Other official information: ·ECHA Information Page for CAS: 8061-51-6 EC: sodium lignosulfon-ate ·ECHA C&L Inventory for CAS: CAS: 8061-51-6 EC: sodium lignosulfon-ate
MSDS

Download/Modify | Technical supported by XiXisys.com. For US version, EU version (23 languages) and more, please refer to xixisys.com/en/sds/search

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 12, 2017

Revision Date: Aug 12, 2017

1.Identification

1.1 GHS Product identifier

Product name Ligninesulfonic Acid Sodium Salt

1.2 Other means of identification

Product number -
Other names disodium,3-(2-hydroxy-3-methoxyphenyl)-2-[2-methoxy-4-(3-sulfonatopropyl)phenoxy]propane-1-sulfonate

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4 Supplier's details

Company WWW.GuideChem.COM
Address 8F, Block C, No.3 Building, Zijin Plaza, No.701, Gudun Road, Hangzhou, Zhejiang 310030, China
Telephone +86-571-89739798
Fax 86(21)54365166

1.5 Emergency phone number

Emergency phone number +86-571-89739798
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

2.Hazard identification

2.1 Classification of the substance or mixture

Not classified.

2.2 GHS label elements, including precautionary statements

Pictogram(s) No symbol.
Signal word

No signal word.

Hazard statement(s)

none

Precautionary statement(s)
Prevention

none

Response

none

Storage

none

Disposal

none

2.3 Other hazards which do not result in classification

none

3.Composition/information on ingredients

3.1 Substances

Chemical name Common names and synonyms CAS number EC number Concentration
Ligninesulfonic Acid Sodium Salt Ligninesulfonic Acid Sodium Salt 8061-51-6 none 100%

4.First-aid measures

4.1 Description of necessary first-aid measures

General advice

Consult a physician. Show this safety data sheet to the doctor in attendance.

If inhaled

If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.

In case of skin contact

Wash off with soap and plenty of water. Consult a physician.

In case of eye contact

Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.

If swallowed

Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.

4.2 Most important symptoms/effects, acute and delayed

no data available

4.3 Indication of immediate medical attention and special treatment needed, if necessary

no data available

5.Fire-fighting measures

5.1 Extinguishing media

Suitable extinguishing media

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

5.2 Specific hazards arising from the chemical

no data available

5.3 Special protective actions for fire-fighters

Wear self-contained breathing apparatus for firefighting if necessary.

6.Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures

Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. For personal protection see section 8.

6.2 Environmental precautions

Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.

6.3 Methods and materials for containment and cleaning up

Pick up and arrange disposal. Sweep up and shovel. Keep in suitable, closed containers for disposal.

7.Handling and storage

7.1 Precautions for safe handling

Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Avoid exposure - obtain special instructions before use.Provide appropriate exhaust ventilation at places where dust is formed. For precautions see section 2.2.

7.2 Conditions for safe storage, including any incompatibilities

Store in cool place. Keep container tightly closed in a dry and well-ventilated place.

8.Exposure controls/personal protection

8.1 Control parameters

Occupational Exposure limit values

no data available

Biological limit values

no data available

8.2 Appropriate engineering controls

Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

8.3 Individual protection measures, such as personal protective equipment (PPE)

Eye/face protection

Safety glasses with side-shields conforming to EN166. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Skin protection

Wear impervious clothing. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique(without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.

Respiratory protection

Wear dust mask when handling large quantities.

Thermal hazards

no data available

9.Physical and chemical properties

Physical state brown powder
Colour no data available
Odour no data available
Melting point/ freezing point -75\u00b0C(lit.)
Boiling point or initial boiling point and boiling range 89\u00b0C/40mmHg(lit.)
Flammability no data available
Lower and upper explosion limit / flammability limit no data available
Flash point 85\u00b0C(lit.)
Auto-ignition temperature no data available
Decomposition temperature no data available
pH no data available
Kinematic viscosity no data available
Solubility no data available
Partition coefficient n-octanol/water (log value) no data available
Vapour pressure no data available
Density and/or relative density no data available
Relative vapour density no data available
Particle characteristics no data available

10.Stability and reactivity

10.1 Reactivity

no data available

10.2 Chemical stability

Stable under recommended storage conditions.

10.3 Possibility of hazardous reactions

no data available

10.4 Conditions to avoid

no data available

10.5 Incompatible materials

no data available

10.6 Hazardous decomposition products

no data available

11.Toxicological information

Acute toxicity

  • Oral: no data available
  • Inhalation: no data available
  • Dermal: no data available

Skin corrosion/irritation

no data available

Serious eye damage/irritation

no data available

Respiratory or skin sensitization

no data available

Germ cell mutagenicity

no data available

Carcinogenicity

no data available

Reproductive toxicity

no data available

STOT-single exposure

no data available

STOT-repeated exposure

no data available

Aspiration hazard

no data available

12.Ecological information

12.1 Toxicity

  • Toxicity to fish: no data available
  • Toxicity to daphnia and other aquatic invertebrates: no data available
  • Toxicity to algae: no data available
  • Toxicity to microorganisms: no data available

12.2 Persistence and degradability

no data available

12.3 Bioaccumulative potential

no data available

12.4 Mobility in soil

no data available

12.5 Other adverse effects

no data available

13.Disposal considerations

13.1 Disposal methods

Product

The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.

Contaminated packaging

Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.

14.Transport information

14.1 UN Number

ADR/RID: Not dangerous goods. IMDG: Not dangerous goods. IATA: Not dangerous goods.

14.2 UN Proper Shipping Name

ADR/RID: unknown
IMDG: unknown
IATA: unknown

14.3 Transport hazard class(es)

ADR/RID: Not dangerous goods. IMDG: Not dangerous goods. IATA: Not dangerous goods.

14.4 Packing group, if applicable

ADR/RID: Not dangerous goods. IMDG: Not dangerous goods. IATA: Not dangerous goods.

14.5 Environmental hazards

ADR/RID: no IMDG: no IATA: no

14.6 Special precautions for user

no data available

14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code

no data available

15.Regulatory information

15.1 Safety, health and environmental regulations specific for the product in question

Chemical name Common names and synonyms CAS number EC number
Ligninesulfonic Acid Sodium Salt Ligninesulfonic Acid Sodium Salt 8061-51-6 none
European Inventory of Existing Commercial Chemical Substances (EINECS) Not Listed.
EC Inventory Not Listed.
United States Toxic Substances Control Act (TSCA) Inventory Listed.
China Catalog of Hazardous chemicals 2015 Not Listed.
New Zealand Inventory of Chemicals (NZIoC) Listed.
Philippines Inventory of Chemicals and Chemical Substances (PICCS) Listed.
Vietnam National Chemical Inventory Listed.
Chinese Chemical Inventory of Existing Chemical Substances (China IECSC) Listed.

16.Other information

Information on revision

Creation Date Aug 12, 2017
Revision Date Aug 12, 2017

Abbreviations and acronyms

  • CAS: Chemical Abstracts Service
  • ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
  • RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
  • IMDG: International Maritime Dangerous Goods
  • IATA: International Air Transportation Association
  • TWA: Time Weighted Average
  • STEL: Short term exposure limit
  • LC50: Lethal Concentration 50%
  • LD50: Lethal Dose 50%
  • EC50: Effective Concentration 50%

References

  • IPCS - The International Chemical Safety Cards (ICSC), website: http://www.ilo.org/dyn/icsc/showcard.home
  • HSDB - Hazardous Substances Data Bank, website: https://toxnet.nlm.nih.gov/newtoxnet/hsdb.htm
  • IARC - International Agency for Research on Cancer, website: http://www.iarc.fr/
  • eChemPortal - The Global Portal to Information on Chemical Substances by OECD, website: http://www.echemportal.org/echemportal/index?pageID=0&request_locale=en
  • CAMEO Chemicals, website: http://cameochemicals.noaa.gov/search/simple
  • ChemIDplus, website: http://chem.sis.nlm.nih.gov/chemidplus/chemidlite.jsp
  • ERG - Emergency Response Guidebook by U.S. Department of Transportation, website: http://www.phmsa.dot.gov/hazmat/library/erg
  • Germany GESTIS-database on hazard substance, website: http://www.dguv.de/ifa/gestis/gestis-stoffdatenbank/index-2.jsp
  • ECHA - European Chemicals Agency, website: https://echa.europa.eu/

Disclaimer: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. We as supplier shall not be held liable for any damage resulting from handling or from contact with the above product.

Computational chemical data

Molecular Weight:41.988173 [g/mol]
Molecular Formula:FNa
H-Bond Donor:0
H-Bond Acceptor:1
Rotatable Bond Count:0
Exact Mass:41.988173
MonoIsotopic Mass:41.988173
Topological Polar Surface Area:0
Heavy Atom Count:2
Formal Charge:0
Complexity:2
Isotope Atom Count:0
Defined Atom Stereocenter Count:0
Undefined Atom Stereocenter Count:0
Defined Bond Stereocenter Count:0
Undefined Bond Stereocenter Count:0
Covalently-Bonded Unit Count:2