Products
  • Products
  • Cas lib
  • Buy offers
  • Encyclopedia
  • Msds lib
  • Synthesis
  • Reach Info
  • Suppliers
Home> Hot Product Listed B   > Benzenesulfonic acid,dodecyl-, sodium salt (1:1)

Benzenesulfonic acid,dodecyl-, sodium salt (1:1)

CAS No.:25155-30-0
EINECS(EC#):246-680-4
Molecular Weight:348.48
Molecular Formula:C18H29NaO3S (Products with the same molecular formula)
MOL File:25155-30-0.mol
Properties
Appearance
white or light yellow flakes
Flash Point
110
Solubilities
Color/Form
light yellow
Stability
Stable.
Safety and Handling
Hazard Codes
Xn:Harmful
Risk Statements
R22;R37/38;R41
Safety Statements
S26;S27;S36/37/39
Safety

Poison by intravenous route. Moderately toxic by ingestion. A skin and severe eye irritant. When heated to decomposition it emits toxic fumes of Na2O. See also SULFONATES.

Hazard Codes:?HarmfulXn (Harmful)
Risk Statements:?
R22-37/38-41 (Harmful if swallowed;Irritating to respiratory system and skin;Risk of serious damage to eyes)
Safety Statements:
S26-27-36/37/39 (In case of contact with eyes, rinse immediately with plenty of water and seek medical advice;Take off immediately all contaminated clothing;Wear suitable protective clothing, gloves and eye/face protection)
WGK Germany: 2

PackingGroup
Z01
Skin, Eye, and Respiratory Irritations
May cause skin irritation.
Cleanup Methods
Land spill: Dig a pit, pond, lagoon, or holding area to contain liquid or solid material. /SRP: If time permits, pits, ponds, lagoons, soak holes, or holding areas should be sealed with an impermeable flexible membrane liner./ Cover solids with a plastic sheet to prevent dissolving in rain or fire fighting water.
Water spill: If dissolved, apply activated carbon at ten times the spilled amount in region of 10 ppm or greater concentration. Use mechanical dredges or lifts to remove immobilized masses of pollutants and precipitates.
Transport
200kgs
Fire Fighting Procedures
Extinguish fire with water.
If material on fire or involved in fire: Extingiush fire using agent suitable for type of surrounding fire. (Material itself does not burn or burns with difficulty.)
Formulations/Preparations
VET: AS WETTING AGENT OR DETERGENT IN INSECTICIDAL DIPS FOR DOGS (0.2-0.5% IN FINAL DILUTION) & WITH SANITIZERS FOR POULTRY DRINKING WATER (30 MG/GAL), WASHING EGGS (150 MG/GAL), & ON PREMISES & EQUIPMENT (300 MG/GAL).
81% PURE, 13% SODIUM SULFATE
Grades of purity: 40% water; varies with manufacturer and use.
ARYLAN SBC
C 550
CONOCO C 550
CONOCO C-50
CONOCO C-60
CONOCO SD 40
DETERLON
ELFAN WA POWDER
F 90
HS 85S
KB
KB (SURFACTANT)
MARANIL
MARLON 375
MARLON A
MARLON A 350
MARLON A 375
MERPISAP AP 90P
NACCONOL 35SL
NANSA HS 80
NANSA HS 85S
NANSA SL
NANSA SS
NEOPELEX 05
PELOPON A
RICHONATE 1850
SANDET 60
SANTOMERSE ME
SINNOZON
SIPONATE DS 10
STEINARYL NKS 50
STEPAN DS 60
SULFRAMIN 1240
SULFRAMIN 85
SULFURIL 50
TREPOLATE F 40
TREPOLATE F 95
ULTRAWET 99LS
ULTRAWET 1T
X 2073
Reactivities and Incompatibilities
... ON CONTACT WITH ACID OR ACID FUMES, THEY EMIT HIGHLY TOXIC FUMES OF SO(X). /SULFONATES/
Other Preventative Measures
If material not involved in fire: Keep material out of water sources and sewers. Build dikes to contain flow as necessary.
Personnel protection: Avoid breathing vapors, or dusts. Keep upwind. Wash away any material which may have contacted the body with copious amounts of soap and water.
Protective Equipment and Clothing
Rubber gloves, safety glasses.
Personnel protection: Wear appropriate chemical boots, protective gloves, and goggles.
Specification

?Sodium dodecylbenzenesulphonate , its cas register number is 25155-30-0. It also can be called Sodium 4-dodecylbenzenesulphonate ; Dodecylbenzenesulfonic acid sodium salt ; and Benzenesulfonic acid, dodecyl-, sodium salt . It is hazardous, so the first aid measures and others should be known. Such as: When on the skin: first, should flush skin with plenty of water immediately for at least 15 minutes while removing contaminated clothing. Secondly, get medical aid. Or in the eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Then get medical aid soon. While, it's inhaled: Remove from exposure and move to fresh air immediately. Give artificial respiration while not breathing. When breathing is difficult, give oxygen. And as soon as to get medical aid. Then you have the ingesting of the product: Wash mouth out with water, and get medical aid immediately. Notes to physician: Treat supportively and symptomatically.
In addition, Sodium dodecylbenzenesulphonate (CAS NO.25155-30-0) is not compatible with strong oxidizing agents, acids, and you must not take it with incompatible materials. And also prevent it to broken down into hazardous decomposition products:?Carbon monoxide, oxides of sulfur, carbon dioxide, hydrogen sulfide.

Octanol/Water Partition Coefficient
log Kow = 0.45
Report

Reported in EPA TSCA Inventory.

Disposal Methods
SRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices.
Reach Info
This substance has been officially registered by enterprises.
ECHA (EU chemicals Management Agency) published the completed registration file as follows:
Completed registration file:
Registered as ubmitted Total tonnage band  
FULL JOINT 1000_10000 view >
Registered companies:
Registrant / Supplier details Latest dossier received
REACH 2008 Ltd 2017
REACH24H CONSULTING GROUP 2017
more >
MSDS

Download/Modify | Technical supported by XiXisys.com. For US version, EU version (23 languages) and more, please refer to xixisys.com/en/sds/search

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 11, 2017

Revision Date: Aug 11, 2017

1.Identification

1.1 GHS Product identifier

Product name Sodium dodecylbenzenesulphonate

1.2 Other means of identification

Product number -
Other names Dodecylbenzenesulfonic Acid,Sodium Salt

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4 Supplier's details

Company WWW.GuideChem.COM
Address 8F, Block C, No.3 Building, Zijin Plaza, No.701, Gudun Road, Hangzhou, Zhejiang 310030, China
Telephone +86-571-89739798
Fax 86(21)54365166

1.5 Emergency phone number

Emergency phone number +86-571-89739798
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

2.Hazard identification

2.1 Classification of the substance or mixture

Acute toxicity - Oral, Category 4

Skin irritation, Category 2

Serious eye damage, Category 1

2.2 GHS label elements, including precautionary statements

Pictogram(s)
Signal word

Danger

Hazard statement(s)

H302 Harmful if swallowed

H315 Causes skin irritation

H318 Causes serious eye damage

Precautionary statement(s)
Prevention

P264 Wash ... thoroughly after handling.

P270 Do not eat, drink or smoke when using this product.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

Response

P301+P312 IF SWALLOWED: Call a POISON CENTER/doctor/\u2026if you feel unwell.

P330 Rinse mouth.

P302+P352 IF ON SKIN: Wash with plenty of water/...

P321 Specific treatment (see ... on this label).

P332+P313 If skin irritation occurs: Get medical advice/attention.

P362+P364 Take off contaminated clothing and wash it before reuse.

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P310 Immediately call a POISON CENTER/doctor/\u2026

Storage

none

Disposal

P501 Dispose of contents/container to ...

2.3 Other hazards which do not result in classification

none

3.Composition/information on ingredients

3.1 Substances

Chemical name Common names and synonyms CAS number EC number Concentration
Sodium dodecylbenzenesulphonate Sodium dodecylbenzenesulphonate 25155-30-0 none 100%

4.First-aid measures

4.1 Description of necessary first-aid measures

General advice

Consult a physician. Show this safety data sheet to the doctor in attendance.

If inhaled

If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.

In case of skin contact

Wash off with soap and plenty of water. Consult a physician.

In case of eye contact

Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.

If swallowed

Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.

4.2 Most important symptoms/effects, acute and delayed

no data available

4.3 Indication of immediate medical attention and special treatment needed, if necessary

no data available

5.Fire-fighting measures

5.1 Extinguishing media

Suitable extinguishing media

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

5.2 Specific hazards arising from the chemical

no data available

5.3 Special protective actions for fire-fighters

Wear self-contained breathing apparatus for firefighting if necessary.

6.Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures

Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. For personal protection see section 8.

6.2 Environmental precautions

Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.

6.3 Methods and materials for containment and cleaning up

Pick up and arrange disposal. Sweep up and shovel. Keep in suitable, closed containers for disposal.

7.Handling and storage

7.1 Precautions for safe handling

Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Avoid exposure - obtain special instructions before use.Provide appropriate exhaust ventilation at places where dust is formed. For precautions see section 2.2.

7.2 Conditions for safe storage, including any incompatibilities

Store in cool place. Keep container tightly closed in a dry and well-ventilated place.

8.Exposure controls/personal protection

8.1 Control parameters

Occupational Exposure limit values

no data available

Biological limit values

no data available

8.2 Appropriate engineering controls

Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

8.3 Individual protection measures, such as personal protective equipment (PPE)

Eye/face protection

Safety glasses with side-shields conforming to EN166. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Skin protection

Wear impervious clothing. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique(without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.

Respiratory protection

Wear dust mask when handling large quantities.

Thermal hazards

no data available

9.Physical and chemical properties

Physical state white or light yellow flakes
Colour no data available
Odour no data available
Melting point/ freezing point 238\u00b0C(lit.)
Boiling point or initial boiling point and boiling range 137\u00b0C/12mmHg(lit.)
Flammability no data available
Lower and upper explosion limit / flammability limit no data available
Flash point 96\u00b0C(lit.)
Auto-ignition temperature no data available
Decomposition temperature no data available
pH no data available
Kinematic viscosity no data available
Solubility no data available
Partition coefficient n-octanol/water (log value) no data available
Vapour pressure no data available
Density and/or relative density no data available
Relative vapour density no data available
Particle characteristics no data available

10.Stability and reactivity

10.1 Reactivity

no data available

10.2 Chemical stability

Stable under recommended storage conditions.

10.3 Possibility of hazardous reactions

no data available

10.4 Conditions to avoid

no data available

10.5 Incompatible materials

no data available

10.6 Hazardous decomposition products

no data available

11.Toxicological information

Acute toxicity

  • Oral: no data available
  • Inhalation: no data available
  • Dermal: no data available

Skin corrosion/irritation

no data available

Serious eye damage/irritation

no data available

Respiratory or skin sensitization

no data available

Germ cell mutagenicity

no data available

Carcinogenicity

no data available

Reproductive toxicity

no data available

STOT-single exposure

no data available

STOT-repeated exposure

no data available

Aspiration hazard

no data available

12.Ecological information

12.1 Toxicity

  • Toxicity to fish: no data available
  • Toxicity to daphnia and other aquatic invertebrates: no data available
  • Toxicity to algae: no data available
  • Toxicity to microorganisms: no data available

12.2 Persistence and degradability

no data available

12.3 Bioaccumulative potential

no data available

12.4 Mobility in soil

no data available

12.5 Other adverse effects

no data available

13.Disposal considerations

13.1 Disposal methods

Product

The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.

Contaminated packaging

Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.

14.Transport information

14.1 UN Number

ADR/RID: UN3077 IMDG: UN3077 IATA: UN3077

14.2 UN Proper Shipping Name

ADR/RID: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S.
IMDG: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S.
IATA: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S.

14.3 Transport hazard class(es)

ADR/RID: 9 IMDG: 9 IATA: 9

14.4 Packing group, if applicable

ADR/RID: III IMDG: III IATA: III

14.5 Environmental hazards

ADR/RID: no IMDG: no IATA: no

14.6 Special precautions for user

no data available

14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code

no data available

15.Regulatory information

15.1 Safety, health and environmental regulations specific for the product in question

Chemical name Common names and synonyms CAS number EC number
Sodium dodecylbenzenesulphonate Sodium dodecylbenzenesulphonate 25155-30-0 none
European Inventory of Existing Commercial Chemical Substances (EINECS) Listed.
EC Inventory Listed.
United States Toxic Substances Control Act (TSCA) Inventory Listed.
China Catalog of Hazardous chemicals 2015 Not Listed.
New Zealand Inventory of Chemicals (NZIoC) Listed.
Philippines Inventory of Chemicals and Chemical Substances (PICCS) Listed.
Vietnam National Chemical Inventory Listed.
Chinese Chemical Inventory of Existing Chemical Substances (China IECSC) Listed.

16.Other information

Information on revision

Creation Date Aug 11, 2017
Revision Date Aug 11, 2017

Abbreviations and acronyms

  • CAS: Chemical Abstracts Service
  • ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
  • RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
  • IMDG: International Maritime Dangerous Goods
  • IATA: International Air Transportation Association
  • TWA: Time Weighted Average
  • STEL: Short term exposure limit
  • LC50: Lethal Concentration 50%
  • LD50: Lethal Dose 50%
  • EC50: Effective Concentration 50%

References

  • IPCS - The International Chemical Safety Cards (ICSC), website: http://www.ilo.org/dyn/icsc/showcard.home
  • HSDB - Hazardous Substances Data Bank, website: https://toxnet.nlm.nih.gov/newtoxnet/hsdb.htm
  • IARC - International Agency for Research on Cancer, website: http://www.iarc.fr/
  • eChemPortal - The Global Portal to Information on Chemical Substances by OECD, website: http://www.echemportal.org/echemportal/index?pageID=0&request_locale=en
  • CAMEO Chemicals, website: http://cameochemicals.noaa.gov/search/simple
  • ChemIDplus, website: http://chem.sis.nlm.nih.gov/chemidplus/chemidlite.jsp
  • ERG - Emergency Response Guidebook by U.S. Department of Transportation, website: http://www.phmsa.dot.gov/hazmat/library/erg
  • Germany GESTIS-database on hazard substance, website: http://www.dguv.de/ifa/gestis/gestis-stoffdatenbank/index-2.jsp
  • ECHA - European Chemicals Agency, website: https://echa.europa.eu/

Disclaimer: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. We as supplier shall not be held liable for any damage resulting from handling or from contact with the above product.

Computational chemical data

Molecular Weight:348.47583 [g/mol]
Molecular Formula:C18H29NaO3S
H-Bond Donor:0
H-Bond Acceptor:3
Rotatable Bond Count:12
Exact Mass:348.17351
MonoIsotopic Mass:348.17351
Topological Polar Surface Area:65.6
Heavy Atom Count:23
Formal Charge:0
Complexity:365
Isotope Atom Count:0
Defined Atom Stereocenter Count:0
Undefined Atom Stereocenter Count:0
Defined Bond Stereocenter Count:0
Undefined Bond Stereocenter Count:0
Covalently-Bonded Unit Count:2