Products
  • Products
  • Cas lib
  • Buy offers
  • Encyclopedia
  • Msds lib
  • Synthesis
  • Reach Info
  • Suppliers
Home> Hot Product Listed S   > Sodium erythorbate

Sodium erythorbate

CAS No.:6381-77-7
EINECS(EC#):228-973-9
Molecular Weight:198.12 [g/mol]
Molecular Formula:C6H7NaO6 (Products with the same molecular formula)
MOL File:6381-77-7.mol
Names and Identifiers
Synonyms

Erbit NIsonaSodium Erythorbate FCC4Sodium Isovitamin CE 316Araboascorbicacid, monosodium salt, D- (6CI)Mercate 20Neo-CebitateD-erythro-Hex-2-enonic acid, g-lactone, monosodium salt (8CI,9CI)Sodium erythorbateOzobanEribate NSodiumisoascorbateErythorbic acid sodium saltSodium D-isoascorbate

Inchi
InChI=1S/C6H8O6/c7-1-2(8)5-3(9)4(10)6(11)12-5/h2,5,7-8,10-11H,1H2/t2-,5-/m1/s1
InChkey
TYQCGQRIZGCHNB-DUZGATOHSA-N
Canonical Smiles
C(C(C1C(=O)C(=C(O1)O)O)O)O
Isomers Smiles
C([C@H]([C@@H]1C(=O)C(=C(O1)O)O)O)O
Properties
Appearance
white crystalline powder
Density
1.954g/cm3
Melting Point
168 - 170 °C
Boiling Point
552.7°Cat760mmHg
Refractive Index
97 ° (C=10, H2O)
Flash Point
238.2°C
Alpha
97 o (C=1,DMF)
Water
15 (g/100 ml) at 25 C
Solubilities
15 (g/100 ml) at 25 C Appearance:white crystalline powder
Transport Information:25kgs
particular:particular
Stability
Stable under normal temperatures and pressures.
Storage temp
Store in a cool, dry place. Store in a tightly closed container.
Safety and Handling
Safety

Safety Information of?Sodium erythorbate (CAS NO.6381-77-7):
RTECS:MP8910000

Transport
25kgs
Specification

First Aid Measures of?Sodium erythorbate (CAS NO.6381-77-7):
Ingestion:If victim is conscious and alert, give 2-4 cupfuls of milk or water. Get medical aid. Wash mouth out with water.
Inhalation:Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Skin:Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.
Eyes:Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Storage of Sodium erythorbate (CAS NO.6381-77-7):
Store in a cool, dry place. Store in a tightly closed container.


?

Reach Info
This substance has been officially registered by enterprises.
ECHA (EU chemicals Management Agency) published the completed registration file as follows:
Completed registration file:
Registered as ubmitted Total tonnage band  
FULL JOINT 100_1000 view >
Registered companies:
Registrant / Supplier details Latest dossier received
REACH24H CONSULTING GROUP 2013
more >
MSDS

Download/Modify | Technical supported by XiXisys.com. For US version, EU version (23 languages) and more, please refer to xixisys.com/en/sds/search

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 12, 2017

Revision Date: Aug 12, 2017

1.Identification

1.1 GHS Product identifier

Product name Sodium erythorbate

1.2 Other means of identification

Product number -
Other names Penite

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only. Food additives
Uses advised against no data available

1.4 Supplier's details

Company WWW.GuideChem.COM
Address 8F, Block C, No.3 Building, Zijin Plaza, No.701, Gudun Road, Hangzhou, Zhejiang 310030, China
Telephone +86-571-89739798
Fax 86(21)54365166

1.5 Emergency phone number

Emergency phone number +86-571-89739798
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

2.Hazard identification

2.1 Classification of the substance or mixture

Not classified.

2.2 GHS label elements, including precautionary statements

Pictogram(s) No symbol.
Signal word

No signal word.

Hazard statement(s)

none

Precautionary statement(s)
Prevention

none

Response

none

Storage

none

Disposal

none

2.3 Other hazards which do not result in classification

none

3.Composition/information on ingredients

3.1 Substances

Chemical name Common names and synonyms CAS number EC number Concentration
Sodium erythorbate Sodium erythorbate 6381-77-7 none 100%

4.First-aid measures

4.1 Description of necessary first-aid measures

General advice

Consult a physician. Show this safety data sheet to the doctor in attendance.

If inhaled

If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.

In case of skin contact

Wash off with soap and plenty of water. Consult a physician.

In case of eye contact

Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.

If swallowed

Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.

4.2 Most important symptoms/effects, acute and delayed

SYMPTOMS: Symptoms of exposure to this compound may include eye and skin irritation. ACUTE/CHRONIC HAZARDS: This compound is irritating to the eyes and skin. When heated to decomposition it emits toxic fumes of carbon monoxide, carbon dioxide and sodium oxides.

4.3 Indication of immediate medical attention and special treatment needed, if necessary

/SRP:/ Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR if necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on the left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. /Poisons A and B/

5.Fire-fighting measures

5.1 Extinguishing media

Suitable extinguishing media

Firefighters should wear full protective clothing including self-contained breathing apparatus. If possible control runoff from fire control or dilution water to prevent environmental contamination.

5.2 Specific hazards arising from the chemical

Flash point data for this chemical are not available; however, it is probably combustible.

5.3 Special protective actions for fire-fighters

Wear self-contained breathing apparatus for firefighting if necessary.

6.Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures

Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. For personal protection see section 8.

6.2 Environmental precautions

Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.

6.3 Methods and materials for containment and cleaning up

Small releases can be cleaned-up wearing gloves, goggles and suitable body protection. In case of a large spill (in which excessive dusts can be generated), clear the affected area, protect people, and respond with trained personnel. If a vacuum is used for spill clean-up, only an explosion-proof vacuum should be used, due to the possibility for dust explosion. Do not allow the spilled product to enter public drainage system or open water courses. Place all spill residues in an appropriate container and seal. Thoroughly wash the area after a spill or leak clean-up. Avoid contamination of soil, and prevent spill residue from running to groundwater or storm drains.

7.Handling and storage

7.1 Precautions for safe handling

Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Avoid exposure - obtain special instructions before use.Provide appropriate exhaust ventilation at places where dust is formed. For precautions see section 2.2.

7.2 Conditions for safe storage, including any incompatibilities

Keep container tightly closed when not in use. Store containers in a cool, dry location, away from direct sunlight, sources of intense heat, or where freezing is possible. Material should be stored in secondary containers or in a diked area, as appropriate. Store containers away from incompatible chemicals. Storage areas should be made of fireresistant materials. Post warning and "NO SMOKING" signs in storage and use areas, as appropriate.

8.Exposure controls/personal protection

8.1 Control parameters

Occupational Exposure limit values

no data available

Biological limit values

no data available

8.2 Appropriate engineering controls

Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

8.3 Individual protection measures, such as personal protective equipment (PPE)

Eye/face protection

Safety glasses with side-shields conforming to EN166. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Skin protection

Wear impervious clothing. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique(without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.

Respiratory protection

Wear dust mask when handling large quantities.

Thermal hazards

no data available

9.Physical and chemical properties

Physical state white crystalline powder
Colour White, free-flowing crystals
Odour no data available
Melting point/ freezing point 49\u00b0C(lit.)
Boiling point or initial boiling point and boiling range 67\u00b0C/14mmHg(lit.)
Flammability no data available
Lower and upper explosion limit / flammability limit no data available
Flash point 91\u00b0C(lit.)
Auto-ignition temperature no data available
Decomposition temperature no data available
pH 5,5 to 8,0 (10\u00a0% aqueous solution)
Kinematic viscosity no data available
Solubility greater than or equal to 100 mg/mL at 17.78\u00b0C
Partition coefficient n-octanol/water (log value) no data available
Vapour pressure no data available
Density and/or relative density 1.954g/cm3
Relative vapour density no data available
Particle characteristics no data available

10.Stability and reactivity

10.1 Reactivity

no data available

10.2 Chemical stability

Stable under recommended storage conditions.

10.3 Possibility of hazardous reactions

Sodium Erythorbate may burn but does not ignite readilySODIUM ERYTHORBATE may be sensitive to prolonged exposure to light. Incompatible with strong oxidizing agents .

10.4 Conditions to avoid

no data available

10.5 Incompatible materials

no data available

10.6 Hazardous decomposition products

Carbon monoxide and carbon dioxide.

11.Toxicological information

Acute toxicity

  • Oral: LD50 Rats oral > 5 g/kg
  • Inhalation: no data available
  • Dermal: no data available

Skin corrosion/irritation

no data available

Serious eye damage/irritation

no data available

Respiratory or skin sensitization

no data available

Germ cell mutagenicity

no data available

Carcinogenicity

no data available

Reproductive toxicity

no data available

STOT-single exposure

no data available

STOT-repeated exposure

no data available

Aspiration hazard

no data available

12.Ecological information

12.1 Toxicity

  • Toxicity to fish: no data available
  • Toxicity to daphnia and other aquatic invertebrates: no data available
  • Toxicity to algae: no data available
  • Toxicity to microorganisms: no data available

12.2 Persistence and degradability

no data available

12.3 Bioaccumulative potential

no data available

12.4 Mobility in soil

no data available

12.5 Other adverse effects

no data available

13.Disposal considerations

13.1 Disposal methods

Product

The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.

Contaminated packaging

Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.

14.Transport information

14.1 UN Number

ADR/RID: UN1993 IMDG: UN1993 IATA: UN1993

14.2 UN Proper Shipping Name

ADR/RID: FLAMMABLE LIQUID, N.O.S.
IMDG: FLAMMABLE LIQUID, N.O.S.
IATA: FLAMMABLE LIQUID, N.O.S.

14.3 Transport hazard class(es)

ADR/RID: 3 IMDG: 3 IATA: 3

14.4 Packing group, if applicable

ADR/RID: III IMDG: III IATA: III

14.5 Environmental hazards

ADR/RID: no IMDG: no IATA: no

14.6 Special precautions for user

no data available

14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code

no data available

15.Regulatory information

15.1 Safety, health and environmental regulations specific for the product in question

Chemical name Common names and synonyms CAS number EC number
Sodium erythorbate Sodium erythorbate 6381-77-7 none
European Inventory of Existing Commercial Chemical Substances (EINECS) Listed.
EC Inventory Listed.
United States Toxic Substances Control Act (TSCA) Inventory Listed.
China Catalog of Hazardous chemicals 2015 Not Listed.
New Zealand Inventory of Chemicals (NZIoC) Listed.
Philippines Inventory of Chemicals and Chemical Substances (PICCS) Listed.
Vietnam National Chemical Inventory Listed.
Chinese Chemical Inventory of Existing Chemical Substances (China IECSC) Listed.

16.Other information

Information on revision

Creation Date Aug 12, 2017
Revision Date Aug 12, 2017

Abbreviations and acronyms

  • CAS: Chemical Abstracts Service
  • ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
  • RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
  • IMDG: International Maritime Dangerous Goods
  • IATA: International Air Transportation Association
  • TWA: Time Weighted Average
  • STEL: Short term exposure limit
  • LC50: Lethal Concentration 50%
  • LD50: Lethal Dose 50%
  • EC50: Effective Concentration 50%

References

  • IPCS - The International Chemical Safety Cards (ICSC), website: http://www.ilo.org/dyn/icsc/showcard.home
  • HSDB - Hazardous Substances Data Bank, website: https://toxnet.nlm.nih.gov/newtoxnet/hsdb.htm
  • IARC - International Agency for Research on Cancer, website: http://www.iarc.fr/
  • eChemPortal - The Global Portal to Information on Chemical Substances by OECD, website: http://www.echemportal.org/echemportal/index?pageID=0&request_locale=en
  • CAMEO Chemicals, website: http://cameochemicals.noaa.gov/search/simple
  • ChemIDplus, website: http://chem.sis.nlm.nih.gov/chemidplus/chemidlite.jsp
  • ERG - Emergency Response Guidebook by U.S. Department of Transportation, website: http://www.phmsa.dot.gov/hazmat/library/erg
  • Germany GESTIS-database on hazard substance, website: http://www.dguv.de/ifa/gestis/gestis-stoffdatenbank/index-2.jsp
  • ECHA - European Chemicals Agency, website: https://echa.europa.eu/

Disclaimer: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. We as supplier shall not be held liable for any damage resulting from handling or from contact with the above product.

Computational chemical data

Molecular Weight:176.12412 [g/mol]
Molecular Formula:C6H8O6
XLogP3:-1.8
H-Bond Donor:4
H-Bond Acceptor:6
Rotatable Bond Count:2
Tautomer Count:8
Exact Mass:176.032088
MonoIsotopic Mass:176.032088
Topological Polar Surface Area:107
Heavy Atom Count:12
Formal Charge:0
Complexity:232
Isotope Atom Count:0
Defined Atom Stereocenter Count:2
Undefined Atom Stereocenter Count:0
Defined Bond Stereocenter Count:0
Undefined Bond Stereocenter Count:0
Covalently-Bonded Unit Count:1
Feature 3D Acceptor Count:4
Feature 3D Donor Count:4
Feature 3D Ring Count:1
Effective Rotor Count:2.4
Conformer Sampling RMSD:0.6
CID Conformer Count:4

Recommended Suppliers
  • Tel:86-27-59721024
  • Fax:86-27-59721024
  • Tel:86-571-88938639
  • Fax:86-571-88938652
  • Tel:86-188-74586545
  • Fax:86-27-83214668
  • Tel:86-571-87396430
  • Fax:86-571-87396431
  • Tel:86-25-52113793
  • Fax:86-25-52113793
  • Tel:86-27-87465837
  • Fax:86-27-87772287
  • Tel:86-27-88660577
  • Fax:86-27-88991911
  • Tel:86-20-18102838259
  • Fax:86-0755-23229476
  • Tel:86-518-85858551
  • Fax:86-518-85877088
  • Tel:86-27-59887160
  • Fax:86-27-59420980