Products
  • Products
  • Cas lib
  • Buy offers
  • Encyclopedia
  • Msds lib
  • Synthesis
  • Reach Info
  • Suppliers
Home> Hot Product Listed 1   > 1,4-Benzenediamine,N1-(1,3-dimethylbutyl)-N4-phenyl-

1,4-Benzenediamine,N1-(1,3-dimethylbutyl)-N4-phenyl-

CAS No.:793-24-8
EINECS(EC#):212-344-0
Molecular Weight:268.39656
Molecular Formula:C18H24N2 (Products with the same molecular formula)
MOL File:793-24-8.mol
Properties
Appearance
Purple flakes.
Density
1.039 g/cm3
Melting Point
45-46℃
Boiling Point
260℃
Refractive Index
1.599
Flash Point
204℃
Water
Water Solubility :
Solubilities
Water Solubility :<0.1 g/100 mL at 17 oC
Color/Form
Dark, violet solid
Stability
No data.
Storage temp
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
Safety and Handling
Safety
Moderately toxic by ingestion. Low toxicity by skin contact. When heated to decomposition it emits toxic vapors of NOx.
PackingGroup
I; II; III
Formulations/Preparations
"Santoflex" /is/ trademark for a series of rubber antioxidants and antiozonants. /Santoflex/
WING-STAY IS TRADEMARK FOR SERIES OF PARAPHENYLENEDIAMINE DERIVATIVES USED AS STABILIZERS, ANTIOXIDANTS & ANTIOZONANTS FOR NATURAL & SYNTHETIC RUBBERS & LATICES. /WING-STAY/
Specification

1.Air & Water Reactions :N-(1,3-Dimethylbutyl)-N'-phenyl-p-phenylenediamine may be sensitive to prolonged exposure to air. Insoluble in water.
2.Reactivity Profile :You should protect N-(1,3-Dimethylbutyl)-N'-phenyl-p-phenylenediamine (CAS NO. 793-24-8)?from exposure to strong oxidizing agents such as chlorine or hydrogen peroxide. N-(1,3-Dimethylbutyl)-N'-phenyl-p-phenylenediamine will ignite if heated strongly.
3.Fire Hazard: N-(1,3-Dimethylbutyl)-N'-phenyl-p-phenylenediamine is combustible.

Disposal Methods
SRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices.
Reach Info
This substance has been officially registered by enterprises.
ECHA (EU chemicals Management Agency) published the completed registration file as follows:
Completed registration file:
Registered as ubmitted Total tonnage band  
FULL JOINT 10000_100000 view >
Registered companies:
Registrant / Supplier details Latest dossier received
CHEMICAL INSPECTION & REGULATION SERVICE LIMITED 2014
DUSLO 2010
INTERTEK FRANCE 2010
more >
MSDS

Download/Modify | Technical supported by XiXisys.com. For US version, EU version (23 languages) and more, please refer to xixisys.com/en/sds/search

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 12, 2017

Revision Date: Aug 12, 2017

1.Identification

1.1 GHS Product identifier

Product name N-(1,3-Dimethylbutyl)-N'-phenyl-p-phenylenediamine

1.2 Other means of identification

Product number -
Other names N-(1,3-Dimethylbutyl)-N\u2018-phenyl-1,4-benzenediamine

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only. Fillers,Fuels and fuel additives,Processing aids, not otherwise listed
Uses advised against no data available

1.4 Supplier's details

Company WWW.GuideChem.COM
Address 8F, Block C, No.3 Building, Zijin Plaza, No.701, Gudun Road, Hangzhou, Zhejiang 310030, China
Telephone +86-571-89739798
Fax 86(21)54365166

1.5 Emergency phone number

Emergency phone number +86-571-89739798
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

2.Hazard identification

2.1 Classification of the substance or mixture

Acute toxicity - Oral, Category 4

Skin sensitization, Category 1

Hazardous to the aquatic environment, short-term (Acute) - Category Acute 1

Hazardous to the aquatic environment, long-term (Chronic) - Category Chronic 1

2.2 GHS label elements, including precautionary statements

Pictogram(s)
Signal word

Warning

Hazard statement(s)

H302 Harmful if swallowed

H317 May cause an allergic skin reaction

H410 Very toxic to aquatic life with long lasting effects

Precautionary statement(s)
Prevention

P264 Wash ... thoroughly after handling.

P270 Do not eat, drink or smoke when using this product.

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.

P272 Contaminated work clothing should not be allowed out of the workplace.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P273 Avoid release to the environment.

Response

P301+P312 IF SWALLOWED: Call a POISON CENTER/doctor/\u2026if you feel unwell.

P330 Rinse mouth.

P302+P352 IF ON SKIN: Wash with plenty of water/...

P333+P313 If skin irritation or rash occurs: Get medical advice/attention.

P321 Specific treatment (see ... on this label).

P362+P364 Take off contaminated clothing and wash it before reuse.

P391 Collect spillage.

Storage

none

Disposal

P501 Dispose of contents/container to ...

2.3 Other hazards which do not result in classification

none

3.Composition/information on ingredients

3.1 Substances

Chemical name Common names and synonyms CAS number EC number Concentration
N-(1,3-Dimethylbutyl)-N'-phenyl-p-phenylenediamine N-(1,3-Dimethylbutyl)-N'-phenyl-p-phenylenediamine 793-24-8 none 100%

4.First-aid measures

4.1 Description of necessary first-aid measures

General advice

Consult a physician. Show this safety data sheet to the doctor in attendance.

If inhaled

Fresh air, rest.

In case of skin contact

Remove contaminated clothes. Rinse and then wash skin with water and soap.

In case of eye contact

First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.

If swallowed

Rinse mouth. Refer for medical attention .

4.2 Most important symptoms/effects, acute and delayed

SYMPTOMS: Symptoms resulting from exposure to this compound include skin irritation and fatigue. ACUTE/CHRONIC HAZARDS: This compound may cause cumulative irritation or sensitization following dermal exposure. When heated to decomposition it emits toxic fumes.

4.3 Indication of immediate medical attention and special treatment needed, if necessary

no data available

5.Fire-fighting measures

5.1 Extinguishing media

Suitable extinguishing media

Fires involving this material should be controlled with a dry chemical, carbon dioxide or Halon extinguisher.

5.2 Specific hazards arising from the chemical

This compound is combustible.

5.3 Special protective actions for fire-fighters

Wear self-contained breathing apparatus for firefighting if necessary.

6.Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures

Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. For personal protection see section 8.

6.2 Environmental precautions

Personal protection: protective gloves and particulate filter respirator adapted to the airborne concentration of the substance. Do NOT let this chemical enter the environment. Sweep spilled substance into covered containers. If appropriate, moisten first to prevent dusting.

6.3 Methods and materials for containment and cleaning up

Pick up and arrange disposal. Sweep up and shovel. Keep in suitable, closed containers for disposal.

7.Handling and storage

7.1 Precautions for safe handling

Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Avoid exposure - obtain special instructions before use.Provide appropriate exhaust ventilation at places where dust is formed. For precautions see section 2.2.

7.2 Conditions for safe storage, including any incompatibilities

Provision to contain effluent from fire extinguishing. Store in an area without drain or sewer access. Separated from strong oxidants.

8.Exposure controls/personal protection

8.1 Control parameters

Occupational Exposure limit values

no data available

Biological limit values

no data available

8.2 Appropriate engineering controls

Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

8.3 Individual protection measures, such as personal protective equipment (PPE)

Eye/face protection

Safety glasses with side-shields conforming to EN166. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Skin protection

Wear impervious clothing. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique(without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.

Respiratory protection

Wear dust mask when handling large quantities.

Thermal hazards

no data available

9.Physical and chemical properties

Physical state Purple flakes.
Colour Dark, violet solid
Odour no data available
Melting point/ freezing point 182\u00b0C(lit.)
Boiling point or initial boiling point and boiling range 165\u00b0C/1mmHg(lit.)
Flammability Combustible. Gives off irritating or toxic fumes (or gases) in a fire.
Lower and upper explosion limit / flammability limit no data available
Flash point 52\u00b0C(lit.)
Auto-ignition temperature ~500\u00b0C
Decomposition temperature no data available
pH no data available
Kinematic viscosity no data available
Solubility less than 1 mg/mL at 17.22\u00b0C
Partition coefficient n-octanol/water (log value) 5.4
Vapour pressure at 25\u00b0C: negligible
Density and/or relative density 1.039 g/cm3
Relative vapour density no data available
Particle characteristics no data available

10.Stability and reactivity

10.1 Reactivity

no data available

10.2 Chemical stability

Stable under recommended storage conditions.

10.3 Possibility of hazardous reactions

You should protect N-(1,3-DIMETHYLBUTYL)-N'-PHENYL-P-PHENYLENEDIAMINE from exposure to strong oxidizing agents such as chlorine or hydrogen peroxide. This material will ignite if heated strongly.

10.4 Conditions to avoid

no data available

10.5 Incompatible materials

no data available

10.6 Hazardous decomposition products

no data available

11.Toxicological information

Acute toxicity

  • Oral: no data available
  • Inhalation: no data available
  • Dermal: no data available

Skin corrosion/irritation

no data available

Serious eye damage/irritation

no data available

Respiratory or skin sensitization

no data available

Germ cell mutagenicity

no data available

Carcinogenicity

no data available

Reproductive toxicity

no data available

STOT-single exposure

no data available

STOT-repeated exposure

no data available

Aspiration hazard

no data available

12.Ecological information

12.1 Toxicity

  • Toxicity to fish: no data available
  • Toxicity to daphnia and other aquatic invertebrates: no data available
  • Toxicity to algae: no data available
  • Toxicity to microorganisms: no data available

12.2 Persistence and degradability

no data available

12.3 Bioaccumulative potential

no data available

12.4 Mobility in soil

no data available

12.5 Other adverse effects

no data available

13.Disposal considerations

13.1 Disposal methods

Product

The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.

Contaminated packaging

Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.

14.Transport information

14.1 UN Number

ADR/RID: UN3077 IMDG: UN3077 IATA: UN3077

14.2 UN Proper Shipping Name

ADR/RID: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S.
IMDG: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S.
IATA: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S.

14.3 Transport hazard class(es)

ADR/RID: 9 IMDG: 9 IATA: 9

14.4 Packing group, if applicable

ADR/RID: III IMDG: III IATA: III

14.5 Environmental hazards

ADR/RID: yes IMDG: yes IATA: yes

14.6 Special precautions for user

no data available

14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code

no data available

15.Regulatory information

15.1 Safety, health and environmental regulations specific for the product in question

Chemical name Common names and synonyms CAS number EC number
N-(1,3-Dimethylbutyl)-N'-phenyl-p-phenylenediamine N-(1,3-Dimethylbutyl)-N'-phenyl-p-phenylenediamine 793-24-8 none
European Inventory of Existing Commercial Chemical Substances (EINECS) Listed.
EC Inventory Listed.
United States Toxic Substances Control Act (TSCA) Inventory Listed.
China Catalog of Hazardous chemicals 2015 Not Listed.
New Zealand Inventory of Chemicals (NZIoC) Listed.
Philippines Inventory of Chemicals and Chemical Substances (PICCS) Listed.
Vietnam National Chemical Inventory Listed.
Chinese Chemical Inventory of Existing Chemical Substances (China IECSC) Listed.

16.Other information

Information on revision

Creation Date Aug 12, 2017
Revision Date Aug 12, 2017

Abbreviations and acronyms

  • CAS: Chemical Abstracts Service
  • ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
  • RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
  • IMDG: International Maritime Dangerous Goods
  • IATA: International Air Transportation Association
  • TWA: Time Weighted Average
  • STEL: Short term exposure limit
  • LC50: Lethal Concentration 50%
  • LD50: Lethal Dose 50%
  • EC50: Effective Concentration 50%

References

  • IPCS - The International Chemical Safety Cards (ICSC), website: http://www.ilo.org/dyn/icsc/showcard.home
  • HSDB - Hazardous Substances Data Bank, website: https://toxnet.nlm.nih.gov/newtoxnet/hsdb.htm
  • IARC - International Agency for Research on Cancer, website: http://www.iarc.fr/
  • eChemPortal - The Global Portal to Information on Chemical Substances by OECD, website: http://www.echemportal.org/echemportal/index?pageID=0&request_locale=en
  • CAMEO Chemicals, website: http://cameochemicals.noaa.gov/search/simple
  • ChemIDplus, website: http://chem.sis.nlm.nih.gov/chemidplus/chemidlite.jsp
  • ERG - Emergency Response Guidebook by U.S. Department of Transportation, website: http://www.phmsa.dot.gov/hazmat/library/erg
  • Germany GESTIS-database on hazard substance, website: http://www.dguv.de/ifa/gestis/gestis-stoffdatenbank/index-2.jsp
  • ECHA - European Chemicals Agency, website: https://echa.europa.eu/

Disclaimer: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. We as supplier shall not be held liable for any damage resulting from handling or from contact with the above product.

Synthesis Route
793-24-8Total: 14 Synthesis Route
Precursor and Product
Computational chemical data

Molecular Weight:268.39656 [g/mol]
Molecular Formula:C18H24N2
XLogP3-AA:5.6
H-Bond Donor:2
H-Bond Acceptor:2
Rotatable Bond Count:6
Exact Mass:268.193949
MonoIsotopic Mass:268.193949
Topological Polar Surface Area:24.1
Heavy Atom Count:20
Formal Charge:0
Complexity:250
Isotope Atom Count:0
Defined Atom Stereocenter Count:0
Undefined Atom Stereocenter Count:1
Defined Bond Stereocenter Count:0
Undefined Bond Stereocenter Count:0
Covalently-Bonded Unit Count:1
Feature 3D Donor Count:2
Feature 3D Cation Count:2
Feature 3D Hydrophobe Count:1
Feature 3D Ring Count:2
Effective Rotor Count:6
Conformer Sampling RMSD:0.8
CID Conformer Count:19

Recommended Suppliers
  • Tel:86-571-88938639
  • Fax:86-571-88938652
  • Tel:86-27-59721024
  • Fax:86-27-59721024
  • Tel:86-571-87396430
  • Fax:86-571-87396431
  • Tel:86-574-89212210
  • Fax:86-574-89212215
  • Tel:86-21-60542966
  • Fax:86-21-61916468
  • Tel:86-27-88660577
  • Fax:86-27-88991911
  • Tel:0086-22-59952083
  • Fax:0086-22-59952082
  • Tel:0086-531-58773055
  • Fax:0086-531-58773066
  • Tel:86-571-86960370
  • Fax:86-571-86940780
  • Tel:86-311-80800737
  • Fax:86-0311-89830448