1.The QFW-3000VI RPM Pipe (Reinforced Plastics Mortar Pipe) Production Line has six parts, such as inner layer manufacturing machine, computer control adding mortar-winding machine, curing station, repairing machine, mould unloading machine and resin mix station. Its controlling center has been adopted the Taiwan’s advanced STD industrial control computer. If the parameter of the wound products being inputted the computer, the design of the linearity for winding of the product will be finished automatically, then controlling the combined movements between the mound rolling speed and the running of the carriage. The pipes produced by the adding mortar-winding machine can decrease the cost and improve the stiffness through adding the mortar without bad influences upon the leak-proof layer and the structure layer.
The RPM pipe’s cost has decreased 40% than the common FRP pipe; the stiffness has been improved greatly. It has many advantages, such as lightweight, anti-corrosion, lower roughness and proper price. It can be widely used in water supply and drainage, agricultural irrigation, petrochemical industry, ocean development, sewage treatment, etc. The production line annual capacity is 5000t, and reasonable structures, latest design, operate easily, high-grade automation are its characteristics. It got the good valuation from the clients.
The main parameters
1. The total power: 193.6kw
2. The maximum diameter can be manufactured: DN3000mm
3. The effective length of the pipe: 12000mm
4. The productivity: 1000kg/h
5. The baking board’s temperature of curing station: 105~160 ℃
6. The maxi speed of conveying roving: 90m/min
7. The maxi width of roving sheet: 200mm
8. The maxi speed of sand conveyance: 100kg/min
9. The maxi mould-unloading force: 83t
10. The rated drawing force of the capstan: 5t
11. The rated lifting force of the supporting pipe trolley: 40t
12. The rated pressure of the hydraulic system: 16Mpa
13. The central height of mould-unloading machine: 2000mm
14. The central height of the other single machine: 1500mm
Above description is for common application machine, our machine can produce pipe diameter range DN15-DN4000mm, it’s customized as per customers’ requirements.
Hengshui Jiubo Composites Co., Ltd. is professional manufacturer of FRP Pipe, FRP storage tank, FRP molded products, FRP pultrused products and FRP production machines, through the continuous development and introduction of professionality and technology, the company rely on advanced technology, exquisite craftsmanship, reliable quality and perfect service, passed ISO9001, ISO14001, OHSAS18001 management system certification, now we have 600 staff, annual sales of glass fiber reinforced plastic series products achieved 20,000 tons, products have been sold to all over the world, USA, Brazil, Japan, Germany, India, Malaysia, Iran, Egypt etc, and won the support and trust from new & old customers. Major products: FRP vessel and chemical equipment in sets; FRP high, medium & low press.....more>>