Aluminum sesquichlorohydrate (ASH) is an inorganic, polymeric basic aluminum chloride salt used as the active ingredient in many deodorants and antiperspirants. It is a white crystalline solid that is soluble in water and ethanol, and it functions as an astringent, antiperspirant, deodorant and antimicrobial agent. Its balance of effective sweat control with a relatively mild skin profile has made it a mainstream choice for products designed for sensitivity.
For formulators, the technical question is not simply whether ASH reduces sweating, but how its polymeric structure, aluminium-to-chloride ratio, pH dependence and compatibility with other ingredients interact with the product form, the claimed performance and the destination market. This guide consolidates those considerations into a practical B2B framework.
| Function | Suitable Users | Core Technical Indicators | Compliance Framework |
|---|---|---|---|
| Antiperspirant active | Deodorant and antiperspirant brands, especially those targeting sensitive skin or reduced-irritation positioning | CAS 11089-92-2; molar mass 97.46 g/mol; pH 3 to 5; aluminium-to-chloride ratio 1.26:1 to 1.90:1; water and alcohol soluble | FDA OTC antiperspirant permitted up to 25%; EU Regulation 1223/2009 maximum 20% |
| Deodorant and antimicrobial agent | Formulators seeking odour control through both binding and bacterial inhibition | Bonds the proteins and fatty acids that cause odour and creates an environment hostile to odour-causing bacteria | Level must remain within the permitted antiperspirant concentration for the market and product form |
| Astringent | Body-care and skin-care developers seeking pore-tightening and refreshing sensory effects | Astringent action tightens pores and refreshes the skin surface | Use restricted in Canadian cosmetics; labelling obligations vary by market |
| Cost-effective active | Developers balancing efficacy and cost across roll-ons, sprays, creams and gels | Effective at lower concentrations than some aluminium alternatives and compatible with common body-care ingredients | Confirm the intended product form and concentration against the current framework |
Aluminum sesquichlorohydrate is a complex basic aluminum chloride that is polymeric and loosely hydrated, rather than a single simple salt. It encompasses a range of aluminium-to-chloride atomic ratios between 1.26:1 and 1.90:1, and pharmacopoeial specifications require not less than 90.0 percent and not more than 110.0 percent of the labelled amount of anhydrous material. This ratio defines the balance between acidity and buffering and is central to the material's performance and skin compatibility.
It is supplied either as a white powder or as a clear, colourless to slightly yellow liquid, with a characteristic odour, a pH of about 3 to 5 in solution and a molar mass of 97.46 g/mol. It is water soluble and freely soluble in alcohol, which makes it straightforward to incorporate into both aqueous and alcohol-based product forms. Its shelf life is typically 24 to 36 months when stored between 15 and 25 °C away from sunlight and moisture.
From a formulator's viewpoint, the importance of aluminum sesquichlorohydrate is the combination of efficacy and tolerability. It is effective at lower concentrations than some aluminium alternatives, which supports cost efficiency, and it is gentler on sensitive skin than aluminum chloride while still providing long-lasting protection against sweat and odour. Its solubility and compatibility with common ingredients make it usable across nearly every antiperspirant format.
Explore the aluminum sesquichlorohydrate technical encyclopedia for additional chemical and application information.
| Parameter | Specification / Description |
|---|---|
| Chemical name | Aluminum sesquichlorohydrate (basic aluminum chloride) |
| Common names | Aluminum sesquichlorohydrate, aluminium sesquichlorohydrate, ASH |
| Molecular formula | AlCl3·3H2O |
| Molar mass | 97.46 g/mol |
| CAS Number | 11089-92-2 |
| EC Number | 234-310-4 |
| Al:Cl atomic ratio | 1.26:1 to 1.90:1 |
Aluminum sesquichlorohydrate is a functional active rather than a cosmetic filler. Its technical value derives from three interacting behaviours: the formation of a physical plug in the sweat duct, the chemical binding of odour precursors and the creation of an environment hostile to odour-causing bacteria. Together these explain its role across roll-ons, sprays, creams and gels.
When aluminum sesquichlorohydrate is applied to the underarm, it interacts with sweat and forms a temporary, gelatinous plug within the eccrine duct. This plug reversibly blocks sweat gland excretion and reduces, but does not completely stop, the flow of axillary perspiration, preventing sweat from reaching the skin surface. The plug can remain within the sweat duct for seven to fourteen days, depending on the rate of skin desquamation, the user's hygiene regimen, activity type and product quality.
Body odour arises largely from the bacterial metabolism of sweat components rather than from sweat itself. Aluminum sesquichlorohydrate forms a strong chemical bond with the proteins and fatty acids that cause odour, holding them so that they cannot be released into the air as volatile malodorous compounds. This binding action reduces or eliminates the unpleasant odour and helps protect against its reformation on the skin surface.
Beyond binding odour precursors, aluminum sesquichlorohydrate helps control the growth of the bacteria that cause underarm odour, creating an environment hostile to their multiplication and thereby reducing the amount of odour generated. Its astringent character tightens the pores and refreshes the skin, an effect that underpins its use in astringent body-care and skin-care applications in addition to its antiperspirant role.
Aluminum sesquichlorohydrate is synthesised by reacting aluminum sulfate with hydrochloric acid in aqueous solution, producing aluminum hydroxide and hydrogen chloride. The aluminum hydroxide is then reacted with a chlorine-containing compound such as sodium chloride, calcium chloride or magnesium chloride to form the polymeric basic aluminum chloride. The reaction is typically run at temperatures of about 100 to 150 °C and at a pH of about 9, after which the product is adjusted and supplied as a solution or dried to a powder.
Because the material is defined by its aluminium-to-chloride ratio and by its degree of polymerisation, manufacturers rely on close process control and analytical verification to stay within specification. For cosmetic-grade material, buyers should confirm assay, the aluminium-to-chloride ratio, pH, appearance and colour, heavy-metal limits, and microbiological quality, and should match each batch certificate against the approved purchasing specification. Consistency of the ratio matters because it affects both efficacy and the irritancy profile of the finished product.
From a formulation perspective, the most relevant comparison is among the aluminium-based antiperspirant actives, because they share a common mechanism but differ in molecular size, potency, irritation profile and regulatory treatment. Grouping them correctly is essential, because a specification and a use level written for one active do not transfer directly to another.
Aluminum sesquichlorohydrate is the intermediate member of the family, offering effective antiperspirant performance at moderate use levels with a skin profile that is gentler than aluminum chloride. Its polymeric structure and defined aluminium-to-chloride ratio make it versatile across product forms, and it is often combined with other antiperspirant agents to enhance sweat and odour protection.
Aluminum chloride is one of the most potent antiperspirant ingredients found in over-the-counter and prescription products. It is preferred for extreme sweating because it is a smaller molecule than other aluminium compounds and can penetrate the sweat duct more effectively, but this potency comes with a greater potential for skin irritation.
Aluminum zirconium tetrachlorohydrex glycine is another common active, combining aluminium and zirconium with glycine as a buffering ligand. It is frequently blended with aluminum sesquichlorohydrate to enhance sweat and odour protection, and the choice between them reflects the required performance level, the intended product form and the irritation target.
| Parameter | Aluminum Sesquichlorohydrate | Aluminum Chloride | Aluminum Zirconium Tetrachlorohydrex Glycine |
|---|---|---|---|
| CAS number | 11089-92-2 | 7446-70-0 | 57158-29-9 |
| Chemical type | Polymeric basic aluminum chloride | Simple aluminium salt; small molecule | Aluminium-zirconium complex with glycine |
| Molar mass | 97.46 g/mol | 133.34 g/mol | Polymeric; not a single value |
| Potency | Moderate; effective at lower concentration | High; used for extreme sweating | High; enhanced sweat and odour protection |
| Irritation profile | Gentler; suited to sensitive skin | More irritating at effective doses | Buffered by glycine to reduce irritation |
| Solubility | Water soluble; freely soluble in alcohol | Water and alcohol soluble | Water soluble |
| Key limitation | Acidic and incompatible with anionic surfactants | Potential for significant skin irritation | Restrictions on zirconium in some markets |
| Property | Typical Description |
|---|---|
| Appearance at 25 °C | Clear, colourless to slightly yellow liquid, or white powder |
| Odor | Characteristic |
| pH | About 3 to 5 in solution |
| Molar mass | 97.46 g/mol |
| Solubility | Water soluble; freely soluble in alcohol |
| Shelf life and storage | 24 to 36 months; store at 15 to 25 °C, away from sunlight and moisture, tightly sealed |
| Product Type | Examples | Technical Objective |
|---|---|---|
| Emulsion and clear roll-ons | Deodorants, antiperspirants | Deliver sweat and odour protection in a light, non-tacky roll-on format |
| Pump and aerosol sprays | Body sprays and antiperspirant aerosols | Provide effective protection in spray formats at their permitted use levels |
| Creams and gels | Aqueous creams and clear gels | Combine astringent and antiperspirant action in leave-on body-care formats |
Aluminum sesquichlorohydrate can be used in essentially all common product forms because it is soluble in both water and alcohol and compatible with the other ingredients typically used in body care. It is also frequently combined with other antiperspirant agents, such as aluminum zirconium tetrachlorohydrex glycine, to enhance sweat and odour protection, and its combination of efficacy at lower concentrations with a mild profile supports both cost efficiency and sensitive-skin positioning.
Begin by identifying whether the active is present primarily for antiperspirant performance, for deodorising or for astringency, because each objective implies a different use level. Recommended concentrations are up to about 6.25 percent in non-spray products and up to about 10.6 percent in spray products, and the chosen level should reflect the intended claim rather than copied from an unrelated product.
Verify assay, the aluminium-to-chloride ratio, pH, appearance and colour, heavy-metal limits and microbiological quality against the approved purchasing specification. Because the material is defined by its ratio and degree of polymerisation, confirm that the supplied grade matches the specification, and match each batch certificate to it.
Premix the aluminum sesquichlorohydrate in water before beginning the overall formulation, and avoid forming lumps, since incomplete dissolution can leave undispersed active that reduces performance and may cause grittiness. Where an alcohol-based system is intended, the active can be complexed with polyethylene glycol or propylene glycol as alcohol-solubilising adjuncts.
Target a final product pH of about 3.5 to 4.5 and avoid anionic surfactants, self-emulsifying grades of emulsifier and strong bases, which can destabilise the system or reduce efficacy. Confirm that the chosen emulsifier and surfactant system is compatible with the acidic active, and re-check the pH after all ingredients have been combined.
Antiperspirant efficacy, odour control and skin tolerance all depend on the finished formula, so confirm performance through clinical or consumer testing and conduct patch tests to monitor for adverse reactions. Also assess fabric staining and product stability over shelf life, since the aluminium salts can interact with textiles and with packaging.
The following transparent antiperspirant roll-on is an illustrative technical example rather than a universal commercial recipe. Actual ingredient levels must be recalculated according to the target feel, pH, claim and destination-market requirements.
| Ingredient (INCI) | Illustrative Quantity | Technical Role |
|---|---|---|
| PEG-7 glyceryl cocoate | 20.0% | Emollient and solubiliser improving spreadability |
| Aluminum sesquichlorohydrate (50% solution) | 40.0% | Antiperspirant and deodorant active |
| Dimethicone copolyol | 5.0% | Silicone surfactant improving feel and glide |
| Cetyl ethylhexanoate | 3.2% | Light emollient ester |
| Dipropylene glycol | 3.0% | Solvent and humectant aiding active solubilisation |
| Polysorbate-20 and isopropyl myristate | 2.0% combined | Non-ionic emulsifier and emollient balancing the system |
| PEG-150 and benzyl alcohol | 1.1% combined | Thickener and preservative |
| Deionised water | To 100% | Continuous phase dissolving the active |
In this published structure, the active is mixed with water until completely homogeneous before the remaining ingredients are added slowly one at a time, with stirring after each addition until a homogeneous dispersion is obtained, and the pH is then adjusted. The finished product is an alcohol-free transparent roll-on with an approximate pH of 3.9 that offers protection against heat, sport and stress, which reflects the general principle that the active must be fully dissolved before the emollient and surfactant system is built around it.
Regulatory treatment of aluminum sesquichlorohydrate depends on its classification as an antiperspirant drug active in some markets and as a cosmetic ingredient in others, which means the same substance can carry different maximum concentrations and labelling obligations. A supplier's statement of conformity does not by itself establish compliance in every destination market.
| Market / Framework | Technical Relevance | Compliance Action |
|---|---|---|
| United States FDA | The FDA considers aluminum sesquichlorohydrate in antiperspirants safe and has approved its use in over-the-counter antiperspirant drug products at a permitted concentration of up to 25 percent. | Confirm the intended OTC drug claim and labelling and verify the level against the current monograph. |
| European Union | Under Regulation 1223/2009 the maximum concentration of aluminum sesquichlorohydrate is 20 percent, considered safe for human use and required to be declared on the label. | Confirm the level against Annex III of the regulation and include the required labelling statement. |
| Canada | Use of aluminum sesquichlorohydrate is restricted in Canadian cosmetics, which means some formats or concentrations permitted elsewhere may not be allowed. | Verify the current Canadian restrictions for the specific product form before formulating for that market. |
| CIR Expert Panel | The Cosmetic Ingredient Review has deferred evaluation of these ingredients because the FDA has already assessed their safety, in accordance with the CIR procedures. | Use the deferral as context but rely on the applicable drug or cosmetic framework for the intended market. |
| Labelling of aluminium | Consumers increasingly scrutinise aluminium content in antiperspirants, and some markets require specific declaration of aluminium salts. | Ensure INCI and active declarations are accurate and consider aluminium-free alternatives for that consumer segment. |
| ISO 22716 / GMP | Good manufacturing practice standards support control of contamination, traceability and manufacturing hazards throughout cosmetic and drug production. | Maintain supplier qualification, batch traceability and validated quality procedures for the finished product. |
Aluminum sesquichlorohydrate is considered safe for use in body-care products at the permitted concentrations, and the principal concern with aluminium-based compounds is their potential to cause skin irritation or allergic reactions rather than systemic toxicity. Product developers should conduct patch tests and monitor for adverse reactions, and should take particular care in products positioned for sensitive skin or for use on recently shaved or broken skin.
There are also broader concerns about the potential health effects of aluminium exposure, although studies have not shown a clear link between the use of aluminium-based antiperspirants and health problems. Because some consumers nevertheless hesitate to use aluminium products, developers may consider offering aluminium-free options for that segment. This is a matter of consumer preference and positioning as much as of demonstrated risk.
For manufacturers, the most important safety principle is to keep the active within its permitted concentration and product form and to avoid claims that exceed what the OTC monograph or cosmetic framework allows. Aluminum sesquichlorohydrate is an antiperspirant and deodorant active, not a therapeutic agent, and any statement about its effects should be traceable to a current regulatory or expert-panel position.
| Reference Point | Illustrative Value |
|---|---|
| FDA permitted concentration | Up to 25% in OTC antiperspirant drug products |
| EU maximum concentration | 20% |
| Recommended use in non-spray products | Up to 6.25% |
| Recommended use in spray products | Up to 10.60% |
| Recommended final product pH | 3.5 to 4.5 |
| Duct plug residence | About 7 to 14 days, depending on desquamation and regimen |
These values are illustrative references drawn from published sources and should not be interpreted as universal legal maximums. Product developers should use the current concentration limits and product-form restrictions applicable to the intended market and should verify performance through appropriate clinical or consumer testing.
It is used as an antiperspirant, deodorant, astringent and antimicrobial active in deodorants and antiperspirants. It physically blocks the eccrine sweat glands with a temporary gelatinous plug, reduces perspiration and binds the fatty acids and proteins that cause underarm odour, while also inhibiting odour-causing bacteria.
Aluminum chloride is a small, highly potent molecule that penetrates the sweat duct effectively and is used for extreme sweating, but it can be irritating. Aluminum sesquichlorohydrate is a larger polymeric basic aluminum chloride that is gentler on sensitive skin and less potent but still effective, and it appears in newer antiperspirants formulated to reduce irritation.
It should be kept away from anionic surfactants, self-emulsifying grades of emulsifier and strong bases, because these can break the emulsion, reduce antiperspirant efficacy or destabilise the plug-forming chemistry. A final product pH of about 3.5 to 4.5 is recommended to keep the active effective and the system stable.
The CAS Registry Number is 11089-92-2 and the EC number is 234-310-4. These identifiers should be matched to the correct grade and verified against current regulatory listings before use in a specific product, since the same substance can be regulated as a drug or as a cosmetic depending on the market.
| Identifier | Value | Resource |
|---|---|---|
| Chemical name | Aluminum sesquichlorohydrate | Technical encyclopedia |
| CAS Number | 11089-92-2 | Chemical dictionary |
| CAS product lookup | 11089-92-2 | Supply search |
| Supplier / trade search | 11089-92-2 | Supplier search |
1. United States Pharmacopeia. Aluminum sesquichlorohydrate monograph: assay and aluminium-to-chloride ratio specification.
2. U.S. Food and Drug Administration. Over-the-counter antiperspirant drug products monograph and permitted active concentrations.
3. European Parliament and Council. Regulation (EC) No 1223/2009 on cosmetic products, Annex III aluminium salt restrictions.
4. Scientific Committee on Consumer Safety. Opinion on the safety of the use of aluminium in cosmetic products.
5. Scientific Reports. Real-time observation of the interaction between aluminium salts and sweat under microfluidic conditions.
6. Cosmetic Ingredient Review. Deferred evaluation of aluminium chlorohydrate and related ingredients, CIR procedures.
7. PubChem. Aluminum sesquichlorohydrate: compound summary and identifiers.
8. International Journal of Cosmetic Science. Mechanisms of antiperspirant action and the formation of the duct plug.
9. Kao Chemicals. Transparent antiperspirant roll-on formulation and processing procedure reference.
![]() |