Ammonium lauryl sulfate, commonly abbreviated ALS, is a salt classified as a sulfate ester and is integral to the cosmetics and personal care product industry. Its high-foaming characteristics make it desirable in products that consumers equate with a lathering or bubbling action, such as shampoos, body washes and bubble baths.
For product developers, the key technical questions are not simply whether ALS foams, but how its anionic character, viscosity response and ammonium counter-ion interact with the primary surfactant system, at what level it cleanses effectively within the rinse-off and prolonged-contact limits, and how it behaves across shampoo, cleanser and oral care formats. This guide consolidates those considerations into a practical B2B formulation framework.
| Function | Suitable Users | Core Technical Indicators | Compliance Framework |
|---|---|---|---|
| Primary anionic surfactant | Formulators of shampoos and body washes who need strong cleansing and foaming at economical cost | CAS 2235-54-3; molecular weight 283.43 g/mol; yellowish viscous liquid; pH 5–6 at 10% aqueous | Permitted in cosmetics under the general provisions of the EU Cosmetics Regulation |
| Foaming agent | Developers of bubble baths, bath foam and foaming cleansers where lather volume drives consumer perception | Copious foam; slightly higher foam than sodium salts and easier to thicken; compatible with alkanolamides and amphoteric surfactants | Rinse-off use supported by CIR assessment for brief, discontinuous use |
| Viscosity builder | Developers of gels and thickened cleansers who require an excellent viscosity response without hydrotrope sensitivity | Easily thickened with sodium chloride; excellent choice for gel products; suitable for systems sensitive to hydrotrope presence | Subject to the general surfactant safety requirements for the finished product |
| Distribution aid | Developers of toothpaste, facial cleansers and shaving creams where product distribution and user experience matter | Improves spreading and wetting; supports emulsifying performance in the finished formula | Prolonged-contact products generally limited to 1% concentration or less |
Ammonium dodecyl sulfate has the chemical formula (CH3(CH2)10CH2OSO3NH4), and its common name is ammonium lauryl sulfate. The anion comprises a nonpolar hydrocarbon chain and a polar sulfate end group, and the combination of nonpolar and polar groups confers surfactant properties to the anion, facilitating the dissolution of both polar and nonpolar materials.
Like any other surfactant, ammonium lauryl sulfate makes a good base for cleansers because it disrupts the hydrogen bonding in water, which is the primary contributor to the high surface tension of water. In solution the lauryl sulfate anions and the ammonium cations separate, and the anions align themselves into micelles, in which the ions form a sphere with the polar sulfate heads on the surface and the nonpolar hydrophobic tails pointing inwards towards the centre.
The overall effect of having these micelles in an aqueous environment is that the water becomes more capable of penetrating things like cloth fibres or hair, and it becomes more readily available to solvate anything coming off the substance. That mechanism is what allows a small amount of surfactant to lift sebum and soil from the skin and hair surface during washing.
Explore the ammonium lauryl sulfate technical encyclopedia for additional chemical and application information.
| Parameter | Specification / Description |
|---|---|
| Chemical name | Ammonium dodecyl sulfate |
| Common names | Ammonium lauryl sulfate, ALS, ammonium lauryl sulphate |
| Molecular formula | C12H29NO4S |
| Molecular weight | 283.43 g/mol |
| CAS Number | 2235-54-3 |
| EC number | 218-793-9 |
| Appearance at 25 °C | Yellowish viscous liquid |
ALS is not primarily used because it performs a conditioning or thickening function on its own, although it does both. Its value is surface-chemical: as a high-foam anionic surfactant it lowers the surface tension of water by forming micelles, and that behaviour underpins its cleansing, foaming and emulsifying roles.
Chemically, lauryl sulfates are very high-foam surfactants that disrupt the surface tension of water by forming micelles around the polar water molecules. The hydrophobic tails of the micelle interior solubilize oily soil while the polar sulfate heads keep the assembly dispersed in water, and this is the mechanism that removes dirt and sebum during washing.
Foaming cleansers contain a significant amount of well-foaming surfactants, and these products are the most popular today because they often provide the most refreshing sensation afterwards. Most body washes, hand soaps and facial cleansing products belong to this category, and they are typically surfactant solutions, gels, scrubs and oil-in-water emulsions with high cleaning power.
ALS is an excellent choice for gel products because it can generate generous foam and is compatible with alkanolamides and amphoteric surfactants. It can be used with cocamidopropyl betaine as a secondary surfactant system for enhanced foaming and non-irritating results on skin applications, which suits mild body washes, shower gels and bubble baths.
Ammonium lauryl sulfate is derived from fatty alcohol and can be used in various detergents and personal care formulations. The lauryl alcohol feedstock is typically obtained from coconut or palm kernel oil, and it is converted to the sulfate ester, which is then neutralized with an ammonium source to give the ammonium salt.
The production route determines the distribution of alkyl chain lengths in the finished material, and that distribution influences foaming, irritation and viscosity behaviour. The parent alkyl sulfates are the most commonly used primary surfactants in most shampoos because they are excellent cleansers and foamers, cost-effective, and easily thickened with sodium chloride.
For formulators, the qualification points are the active matter content, pH, colour, residual fatty alcohol and ammonium content. Suppliers typically specify solids and colour, and buyers should verify that the grade offered is intended for personal care use, since it can also be used in systems that require an excellent viscosity response and are sensitive to the presence of hydrotrope.
From a formulation perspective, the most relevant comparison is among ALS and the other anionic surfactants it is commonly substituted for or blended with, rather than among unrelated chemical families. The three commonly discussed categories are alkyl sulfates, alkyl ether sulfates, and the amphoteric co-surfactants used alongside them.
ALS belongs to the alkyl sulfate family and is classified as an anionic surfactant found primarily in shampoos and body wash as a foaming agent. Within the family it is most often compared with sodium lauryl sulfate, and the choice between the sodium and ammonium salts comes down to foam volume, thickening behaviour and the pH sensitivity of the ammonium counter-ion.
ALS is also compared with the ethoxylated alkyl ether sulfates, which are typically milder and less irritating than the non-ethoxylated sulfates. Formulators frequently blend the two families to balance cost, foam quality and mildness, and the blend ratio becomes part of the overall surfactant system specification.
Functionally, ALS is most often paired with amphoteric co-surfactants such as cocamidopropyl betaine, which soften the cleansing profile and improve mildness. This combination supports mild body washes, shower gels and bubble baths, and the pair should be evaluated as a system rather than as two independent ingredients.
| Parameter | Ammonium Lauryl Sulfate | Sodium Lauryl Sulfate | Ammonium Laureth Sulfate |
|---|---|---|---|
| Surfactant class | Anionic alkyl sulfate | Anionic alkyl sulfate | Anionic alkyl ether sulfate (ethoxylated) |
| Foam volume | Slightly higher foam than the sodium salt | High foam, but lower than the ammonium salts | Slightly higher foam, with a softer lather |
| Mildness | Mild anionic, best suited to neutral or slightly acidic systems | Potentially more irritating at equal active levels | Generally milder due to ethoxylation |
| Thickening | Easy to thicken with sodium chloride | Also easily thickened with salt | Easy to thicken, often with better clarity |
| pH sensitivity | Can release free ammonia at higher pH | Stable across a broad pH range | Also subject to ammonia release at high pH |
| Typical use level | Up to 26% in a body wash base; 5–10% in non-colouring shampoos | Similar range in rinse-off products | Similar range, often in milder systems |
| Primary use | Shampoos, body wash, bubble bath, bath foam | Shampoos, toothpaste, general cleansers | Milder shampoos and baby products |
| Key limitation | Ammonia release limits use to neutral or acidic pH | Higher irritation potential and less foam | Higher cost than the non-ethoxylated sulfates |
| Property | Typical Description |
|---|---|
| Appearance at 25 °C | Yellowish viscous liquid |
| Odor | Odorless |
| pH (10% aqueous) | 5–6 |
| Molecular weight | 283.43 g/mol |
| Density at 18 °C | 1.02 g/cm3 |
| Solubility | Water soluble |
| Refractive index | 1.37 |
| Boiling point | 418 °C (784 °F; 691 K) |
| Stability | Stable; incompatible with strong oxidizing agents |
| Shelf life | 12–18 months stored in well-filled, tightly sealed containers at 15–25 °C |
| Function | Typical Applications | Key Formulation Objective |
|---|---|---|
| Cleansing | Ordinary hair shampoos designed to clean hair with moderate sebum production and without chemically processed hair | Deliver good cleansing with minimal conditioning using sodium or ammonium lauryl sulfate |
| Anionic surfactant | General cleansers where good lathering and detergent properties are necessary to remove dirt | Provide effective detergency and lather in the primary surfactant role |
| Foaming | Body washes, hand soaps, facial cleansing products, bath foam and bubble bath | Give a refreshing foaming experience with high cleaning power |
| Distribution and wetting | Toothpaste, facial cleansers and shaving creams where even spreading is valued | Improve product distribution and enhance the overall user experience |
Products that frequently contain ammonium lauryl sulfate include hair care such as shampoos and gentle hair cleansers; skin care such as face cleansers, body wash and bath foam; oral care such as toothpaste; and shaving creams and liquid soaps where cleansing and distribution are both important.
Start with the product category and its foam, mildness and viscosity targets. Decide whether ALS is the primary surfactant or part of a blend with an amphoteric co-surfactant, and set the target use level within the reported category range. The concentration should be justified by the specific product rather than copied from an unrelated formulation.
Before batching, confirm identity, active matter content, pH, colour and ammonium content against the approved purchasing specification. A certificate of analysis should be matched against that specification, because the chain-length distribution and the residual fatty alcohol affect foaming and irritation behaviour.
ALS is typically combined with the other surfactants and water in the main mixing vessel, as shown in the worked formulation below, and the sequence should be designed to avoid excessive foaming during manufacture. In the illustrated procedure the oil-phase ingredients are heated until clear, the remaining ingredients are added in order, and the batch is mixed gently to avoid foaming.
Because the ammonium counter-ion can release free ammonia at higher pH, the finished product should be maintained at neutral or slightly acidic pH and the headspace monitored where packaging allows. Mildness and cleansing performance should be demonstrated on the finished system rather than inferred from the use level, given the concentration-dependent nature of irritation.
The following formulation, a skin-compatible shower gel for dry skin built around an NMF-mimicking blend, is an illustrative technical example rather than a universal commercial recipe. Actual ingredient levels must be recalculated according to the stability, viscosity and sensory requirements of each project.
| Ingredient | Illustrative Quantity | Technical Role |
|---|---|---|
| Polyglyceryl-4 caprate | 2.00% | Refatting emollient improving after-feel on dry skin |
| Glyceryl oleate | 0.5% | Co-emollient softening the cleansing experience |
| Ammonium lauryl sulfate | 26.00% | Primary anionic surfactant delivering cleansing and rich foam |
| Fragrance | 0.5% | Sensory character of the finished product |
| Aqua | 56.0% | Continuous aqueous phase |
| Natural moisturizing factor blend (sodium lactate, sodium PCA, glycine, fructose, urea, niacinamide, inositol, sodium benzoate, lactic acid) | 1.0% | NMF mimic supporting skin hydration and barrier comfort |
| Cocamidopropyl betaine | 14.00% | Secondary amphoteric surfactant boosting mildness and foam |
The processing sequence mixes and heats polyglyceryl-4 caprate and glyceryl oleate until clear, adds the remaining ingredients in the given order, and mixes gently to avoid foaming. The formulation has strong refatting properties without an additional thickener.
Regulatory treatment of ammonium lauryl sulfate reflects its status as a widely accepted cosmetic surfactant rather than a restricted active. A supplier's statement that a material is "cosmetic grade" does not by itself establish compliance in every destination market, so the intended use and destination should be checked explicitly.
| Market / Framework | Technical Relevance | Compliance Action |
|---|---|---|
| United States FDA | The US FDA includes ammonium lauryl sulfate as an indirect food additive, and both ingredients are permitted to be used as components of coatings. | Confirm the intended use falls within the applicable indirect-additive provision and label accordingly. |
| European Union | Ammonium lauryl sulfate may be used in cosmetics and personal care products marketed in Europe according to the general provisions of the Cosmetics Regulation of the European Union. | Apply the general EU cosmetic safety requirements and document the risk assessment in the safety report. |
| Cosmetic Ingredient Review (CIR) | The CIR Expert Panel assessed ammonium lauryl sulfate in 1983 and 2002, concluding each time that the data showed these ingredients were safe in formulations designed for brief, discontinuous use followed by thorough rinsing. | In products intended for prolonged contact with skin, keep concentrations at or below 1%. |
| HERA and national assessments | The Human and Environmental Risk Assessment project investigated all alkyl sulfates, and the results apply directly to ALS, with most alkyl sulfates showing low acute oral toxicity and concentration-dependent skin and eye irritation. | Use the HERA assessment as supporting evidence while applying the applicable national limits. |
| Environmental and biodegradability frameworks | All alkyl sulfates are readily biodegradable, and standard wastewater treatment removes 96–99.96% of short-chain alkyl sulfates; even under anaerobic conditions at least 80% of the original volume is biodegraded after 15 days, rising to 90% after four weeks. | Maintain supplier qualification, batch traceability and documentation of the biodegradability profile. |
| Manufacturing quality standards | Consistent active matter content, pH and colour are central to reproducible foaming and viscosity. | Retain certificates of analysis and validated methods for active matter content. |
The safety profile of ammonium lauryl sulfate is well characterised. In high concentrations this molecule may cause severe eye and skin irritation, and inhalation may irritate the respiratory system, while ingestion may cause irritation, nausea or diarrhea. At lower concentrations the picture is much milder: concentrations below 1% were essentially non-irritating, while concentrations greater than 10% produced moderate to intense skin irritation.
Real-world complaint data support this concentration dependence. In a 1983 report by the Cosmetic Ingredient Review, shampoos containing up to 31% ALS registered only six health complaints out of 6.8 million units sold, comprising two scalp itches, two allergic reactions, one hair damage and one complaint of eye irritation. A two-year study on rats found that the material did not sensitize the skin or appear carcinogenic, and that longer carbon chains of 16 to 18 carbons were less irritating to the skin than chains of 12 to 15 carbons.
For product developers, the most important safety principle is to match the use level and pH to the intended skin contact pattern. The CIR report concluded that sodium and ammonium lauryl sulfate appear safe in formulations designed for discontinuous, brief use followed by thorough rinsing from the skin's surface, and that in products intended for prolonged use concentrations should not exceed 1%.
The following reference framework summarises the maximum usage levels of ammonium lauryl sulfate reported by cosmetic category and should be read as general guidance rather than as a fixed specification. Actual levels depend on the product format and the intended skin contact pattern.
| Category | Usage Level | Functional Basis |
|---|---|---|
| Baby shampoos | 10–25% | Provides gentle lathering in a rinse-off infant format |
| Bath oils, tablets and salts | 25–50% | Delivers foam and dispersion in bath additives |
| Bubble baths | 25–50% | Creates the sustained lather expected in bubble bath products |
| Hair shampoos (non-colouring) | 5–10% | Primary cleansing and foaming surfactant at typical shampoo use level |
| Hair shampoos (colouring) | 10–25% | Higher load for cleansing color-treated hair |
| Bath soaps and detergents | 25–50% | Supplies detergency and lather in bar and liquid bath soaps |
| Skin cleansing preparations (cold creams, lotions, liquids and pads) | 1–5% | Supports emulsification and cleansing at restrained levels for skin contact |
| Other skin care preparations | 0.1–1% | Low-level surfactant function in leave-on or longer-contact skin products |
Note: The figures above are indicative and should be confirmed against the current CIR guidance and the requirements of the specific product category.
Yes. Ammonium lauryl sulfate is an excellent choice for gel products because it can generate generous foam and is compatible with alkanolamides and amphoteric surfactants. It is also suited to systems that require an excellent viscosity response and are sensitive to the presence of hydrotrope, which simplifies thickening with sodium chloride.
Because the ammonium salt can release free ammonia at higher pH values. This can affect odour and product performance, which is why ALS is described as a mild anionic surfactant suitable for formulations of neutral or slightly acidic personal care products and cosmetics. Maintaining the target pH range is therefore a core processing requirement.
Ammonium lauryl sulfate can be used with cocamidopropyl betaine as a secondary surfactant system for enhanced foaming and non-irritating results on skin applications. This pairing suits mild body washes, shower gels and bubble baths, because the amphoteric co-surfactant offsets the irritation potential of the strong anionic primary surfactant.
Yes. An environmental review of alkyl sulfates including ammonium lauryl sulfate found that they are readily biodegradable, making them a more eco-friendly choice in the personal care industry. Standard wastewater treatment removes 96 to 99.96% of short-chain alkyl sulfates, and at least 80% of the original volume is biodegraded within 15 days even under anaerobic conditions.
| Identifier | Value | Resource |
|---|---|---|
| Chemical name | Ammonium dodecyl sulfate | Technical encyclopedia |
| CAS Number | 2235-54-3 | Chemical dictionary |
| CAS product lookup | 2235-54-3 | Supply search |
| Supplier / trade search | 2235-54-3 | Supplier search |
1. Cosmetic Ingredient Review. Safety Assessment of Ammonium Lauryl Sulfate, 1983 and 2002 reviews.
2. Human and Environmental Risk Assessment (HERA). Alkyl sulfates risk assessment dossier.
3. U.S. Food and Drug Administration. Indirect food additive provisions for ammonium lauryl sulfate.
4. European Parliament and Council. Regulation (EC) No 1223/2009 on cosmetic products.
5. European Commission. CosIng cosmetic ingredient database entry for sodium lauryl sulfate.
6. Australian Government. Industrial Chemicals human health tier II assessment for sodium, ammonium and potassium lauryl sulfate.
7. American Cleaning Institute. Alkyl sulfates safety information.
8. European Chemicals Agency. Substance information for ammonium lauryl sulfate.
![]() |