Cetearyl alcohol is a waxy mixture of cetyl and stearyl fatty alcohols used throughout cosmetics and personal care products, where it improves texture and thickness while adding emollient and moisture-retaining properties. Unlike the volatile alcohols that dry the skin, this fatty alcohol helps trap water and treat dryness.
For product developers, the key questions are not simply whether cetearyl alcohol thickens a product, but how its blend of chain lengths delivers several functions at once, how it should be melted into the oil phase, and how its safety data and use levels differ across product categories and markets. This guide consolidates those considerations into a practical B2B formulation framework.
| Function | Suitable Users | Core Technical Indicators | Compliance Framework |
|---|---|---|---|
| Emollient | Skincare and hair care developers seeking a soft feel and added body in water-in-oil, oil-in-water and anhydrous systems | CAS 67762-27-0; white waxy solid; practically insoluble in water; typical use 1-3% | Cosmetic ingredient labelling and the EU Cosmetics Regulation |
| Co-emulsifier and stabiliser | Formulators building stable emulsions who need texture, consistency and thickness to be maintained over shelf life | Reduces interfacial tension between water and oil; viscosity about 53 cP at 25 °C; melting point about 50 °C | CIR safety assessment supporting use as a cosmetic ingredient |
| Opacifier and viscosity controller | Developers of creams, lotions, cleansers and bath products who want a rich, creamy appearance and controlled body | Prevents light transmission and adds whiteness; boosts foam volume, texture and stability | Category-specific maximum use levels published by CIR |
| Natural-source positioning | Brands pursuing plant-derived, vegan or halal claims who value a cetearyl alcohol sourced from vegetable rather than animal feedstock | Plant-derived grades biodegradable and non-toxic; not known to pose an environmental hazard | Substantiation of sourcing claims and responsible-sourcing considerations for palm-derived feedstock |
Cetearyl alcohol is a white, waxy solid, usually supplied in flake or pastille form, that consists primarily of a combination of cetyl alcohol (hexadecanol) and stearyl alcohol (octadecanol). It is also known as cetostearyl alcohol and cetyl/stearyl alcohol. It is insoluble in water, soluble in alcohol and oils, and odourless.
Because it is a mixture rather than a single compound, its exact composition affects performance. Technical-grade cetearyl alcohol contains approximately 65-80% stearyl alcohol and 20-35% cetyl alcohol, with small quantities of longer and shorter chain alcohols usually present. That blend is deliberate: the two pure fatty alcohols behave differently, and combining them gives a balance of body and spreadability that neither provides alone.
The word "alcohol" causes frequent confusion, so it is worth stating plainly that cetearyl alcohol is a fatty alcohol and behaves opposite to ethanol. Where a short-chain alcohol evaporates and can leave skin feeling dry, a fatty alcohol remains on the surface, helps trap water and contributes a soft, conditioned feel.
Explore the cetearyl alcohol technical encyclopedia for additional chemical and application information.
| Parameter | Specification / Description |
|---|---|
| Chemical name | Mixture of cetyl alcohol (1-hexadecanol) and stearyl alcohol (1-octadecanol) |
| Common names | Cetearyl alcohol, cetostearyl alcohol, cetyl/stearyl alcohol |
| Molecular formula | C16H34O (cetyl) and C18H38O (stearyl) blend |
| Molecular weight | About 260 g/mol (typical) |
| CAS Number | 67762-27-0 |
| EC Number | 267-008-6 |
| Composition | Approximately 65-80% stearyl alcohol and 20-35% cetyl alcohol in technical grade |
Cetearyl alcohol is valued because a single raw material delivers several technical functions at once, and its behaviour is best understood by separating those functions rather than treating it as a simple thickener.
As an emollient, cetearyl alcohol can be used in water-in-oil emulsions, oil-in-water emulsions and anhydrous formulations, where it gives skin and hair a soft feel and adds body to creams and lotions. Because it is a fatty material, it sits in the oil phase and helps limit water loss rather than evaporating away. That is the basis of the moisture-retaining behaviour of fatty alcohols.
Cetearyl alcohol emulsifies immiscible liquids by modifying the interfacial tension between water and oil, helping the formula maintain its texture, consistency and thickness over time. It is commonly used as a co-emulsifier alongside a primary emulsifier, where it reinforces the interface and improves the robustness of the emulsion. This is why changes in cetearyl alcohol level often show up as changes in viscosity and stability rather than as obvious changes in skin feel.
As an opacifier, cetearyl alcohol provides a rich, creamy appearance, preventing light transmission and adding brightness and whiteness to the end product. It also controls viscosity in creams, lotions, cleansers and shower or bath products, and as a non-ionic surfactant it can boost foam volume, texture and stability to improve the efficacy of cleansers. These effects are closely linked to the crystalline structure the fatty alcohol forms in the cooled emulsion.
Cetearyl alcohol is a solid organic compound that can be isolated from fats and oils, with feedstock that may be vegetable or animal in origin. Cetyl alcohol can also be synthetically manufactured by reducing ethyl palmitate with metallic sodium and alcohol, or under acidic conditions using lithium aluminium hydride as a catalyst. In practice, most material used in cosmetics is plant-derived.
The origin matters for two reasons. It affects the claims a brand can support, because plant-derived material is compatible with vegan and halal positioning while animal-derived material must satisfy additional expectations. Separately, sourcing of palm oil, a common feedstock, has raised environmental concerns around deforestation, so some manufacturers work toward sustainably sourced ingredients or alternatives.
Producers generally control the ratio of cetyl to stearyl alcohol and the level of longer and shorter chain impurities, since these influence melting behaviour, texture and feel. Buyers should qualify the material on composition and performance, not on the generic name alone.
From a formulation perspective, the most useful comparison is among cetearyl alcohol and the related fatty alcohols it is normally used alongside or substituted for. They share the same functional chemistry, so the choice usually comes down to melting point, feel and body.
Cetearyl alcohol combines cetyl and stearyl chains and is the general-purpose choice when a balance of body, texture and spreadability is wanted. Because it contains both chain lengths, it gives formulators a practical middle ground between the two pure alcohols.
Cetyl alcohol is the shorter of the two chains and is associated with a lighter feel and faster incorporation into the oil phase. It is often chosen where a less heavy, more rapidly spreading product is the objective.
Stearyl alcohol is the longer chain and tends to contribute more body and a slightly heavier feel. A higher stearyl fraction raises the structure-forming contribution of the blend, which is why the composition ratio affects viscosity and texture.
| Parameter | Cetearyl Alcohol | Cetyl Alcohol | Stearyl Alcohol |
|---|---|---|---|
| Chain length | C16 and C18 blend | C16 | C18 |
| Molecular weight | About 260 g/mol | About 242 g/mol | About 270 g/mol |
| Sensory contribution | Balanced body and spreadability | Lighter, faster-spreading feel | More body, slightly heavier feel |
| Typical role | General co-emulsifier, emollient and thickener | Feel modifier and oil-phase emollient | Structure-building emollient |
| Solubility | Practically insoluble in water; soluble in alcohol and oils | Practically insoluble in water; soluble in alcohol | Practically insoluble in water; soluble in alcohol |
| Formulation advantage | Several functions from one material with wide pH tolerance | Adjusts feel toward a lighter product | Adds solidity and viscosity to the oil phase |
| Key limitation | Must be melted; excess can create waxy or grainy texture | Provides less structure than a C18-rich blend | Can feel heavy if over-used in light formulations |
| Property | Typical Description |
|---|---|
| Appearance at 25 °C | Pastilles or liquid, waxy white solid at room temperature |
| Odour | Odourless |
| Molecular weight | About 260 g/mol |
| Density at 18 °C | 1.0117 g/cm3 |
| Melting point | About 50 °C (50.5 °F; 283.4 K) |
| Boiling point | About 249 °C (338 °F; 443 K) |
| Viscosity at 25 °C | About 53 cP |
| Solubility | Freely soluble in ethyl ether and chloroform; soluble in petrol ether and ethyl alcohol; practically insoluble in water and paraffin oil |
| Shelf life and storage | 24 months in a cool, dry place in original sealed containers protected from moisture; ideal storage below 40 °C |
| Function | Typical Applications | Key Formulation Objective |
|---|---|---|
| Emollient | Face creams, moisturising lotions and barrier creams | Deliver a soft feel and added body without greasiness |
| Emulsifying and stabilising | Oil-in-water and water-in-oil emulsions across skincare and hair care | Reinforce the interface and keep texture and thickness stable |
| Opacifying and viscosity control | Creams, lotions, cleansers and shower or bath products | Create a rich, creamy appearance and controlled body |
| Hair conditioning and slip | Conditioners, shampoos, hair colour and temporary colouring products, hairspray | Improve spreadability so products glide through the hair |
| Foam boosting | Body wash, bar soaps and exfoliants | Improve foam volume, texture and stability to support cleansing efficacy |
In practice, cetearyl alcohol appears wherever a rich, stable, well-bodied texture is expected. In skincare it produces rich formulas while reducing potential stickiness from oils and butters. In hair care it increases spreadability and slip, allowing products to glide through the hair.
Start from the desired texture and the product category, and work within the typical guidance of roughly 1% to 3%. Because cetearyl alcohol is commonly used as a co-emulsifier and thickener to help stabilise the emulsion, it is often used to supplement the oil phase, reducing the amount of heavy emollients and improving the texture of the product. Substituting a percentage of the butter in a formula with cetearyl alcohol can give the moisturiser a pleasant skin feel while maintaining its body and texture.
Cetearyl alcohol should be added in the heated oil phase stage of the formulation, and it is suitable for a wide pH range. Because it melts at about 50 °C and is practically insoluble in water, it must be melted into the oil phase before emulsification rather than dispersed in the aqueous phase. Confirm the melt and hold temperature, since an incomplete melt can leave waxy specks in the finished product.
The structure that gives cetearyl alcohol its thickening and opacifying effect develops as the emulsion cools and the fatty alcohol crystallises. Hold the oil and water phases at a consistent temperature during homogenisation, then control the cooling rate rather than rushing it. Rapid or uneven cooling is a common cause of graininess and instability, so this stage deserves explicit parameters.
Confirm that the finished product meets its target viscosity, texture and appearance, and check stability under the intended storage conditions. Because a thickened oil phase can affect how a preservative partitions between water and oil, verify preservative efficacy in the final system rather than assuming it carries over.
The following formulation is an illustrative technical example based on a cleansing bar for hair and body, rather than a universal commercial recipe. Ingredient levels must be recalculated according to target texture, raw-material grade, processing equipment and destination-market requirements.
| Phase | Ingredient (INCI) | Illustrative Quantity (% wt) | Technical Role |
|---|---|---|---|
| A | Cetearyl Alcohol | 30 | Structure former, opacifier and co-emulsifier that gives the bar its solid body |
| A | Hydrogenated Vegetable Oil | 5 | Hard fat that reinforces bar hardness and melting behaviour |
| A | Cetearyl Alcohol, Lecithin, Sodium Cetearyl Sulfate, Vegetable Oil | 10 | Emulsifying blend that supports dispersion and skin conditioning |
| A | Sodium Lauryl Sulfate | 33 | Primary anionic surfactant that generates lather during cleansing |
| A | Benzyl Alcohol | 0.4 | Preservative that protects the bar from microbial growth |
| B | Aqua | 9 | Demineralised water carrier that hydrates the surfactant blend |
| B | Cocamidopropyl Betaine | 5 | Secondary amphoteric surfactant that softens the lather and reduces irritation potential |
| B | Sorbitol | 2.6 | Humectant that improves skin feel after washing |
| B | Gluconolactone | 1 | Supporting acid that contributes to product feel and stability |
| B | Succinic Acid | 1 | pH-supporting acid used for purifying skin and scalp positioning |
| B | Gluconic Acid, Caprylyl/capryl Glucoside, Cymbopogon Citratus Leaf Extract | 1 | Botanical blend intended to reduce reliance on listed preservatives |
| C | Cyclodextrin | 2 | Encapsulating agent that helps manage volatile or odour-active components |
| Total | 100 | Balanced to a complete solid cleansing bar |
Illustrative procedure: Prepare phase A at 70 °C in a separate beaker. Add phase B into phase A under gentle to medium agitation, keeping temperature consistent for 10 minutes. Add phase C at 70 °C, then pour into packaging at 60-65 °C. A typical specification is an off-white to light yellow solid, with stability of one month at 50 °C and three months at room temperature or 40 °C.
Regulatory treatment of cetearyl alcohol depends on feedstock and on the finished product category. A supplier's statement that a material is cosmetic grade does not by itself establish compliance in every destination market.
| Market / Framework | Technical Relevance | Compliance Action |
|---|---|---|
| United States FDA | When derived from plants, cetearyl alcohol may be used in cosmetics and personal care products. It also appears on the FDA list of safe and permitted food additives. | Confirm the intended use, feedstock origin and current applicable FDA requirements. |
| European Union | When derived from plants, cetearyl alcohol may be used in cosmetics marketed in Europe under the general provisions of the EU Cosmetics Regulation. Ingredients of animal origin must comply with EU animal by-products regulations. | Verify feedstock documentation and confirm that the safety assessment and labelling meet EU expectations. |
| Cosmetic Ingredient Review (CIR) | The CIR Expert Panel concluded that these fatty alcohols were safe for use as cosmetic ingredients, and it publishes category-specific use levels. | Treat published use levels as technical reference values rather than universal legal maximums. |
| EU REACH | REACH obligations depend on the substance, the manufacturer or importer, the tonnage and any applicable exemptions. | Verify the registration status across the supply chain rather than assuming cosmetic use removes every obligation. |
| ECHA dossier | A registered dossier provides hazard, use and classification information relevant to the supply chain. | Reference current ECHA information as part of supplier qualification and hazard communication. |
| ISO 22716 / GMP | Good manufacturing practice for cosmetics supports control of contamination, traceability and process consistency. | Maintain supplier qualification and validated quality procedures across the supply chain. |
| Sourcing and sustainability | Sourcing of palm oil, a common feedstock, has raised environmental concerns, and some manufacturers are working toward sustainable alternatives. | Substantiate responsible-sourcing and origin claims where they are made. |
Cetearyl alcohol is a safe and non-toxic ingredient that poses little to no risk when applied to the skin and hair, and it was found to have no significant toxicity and to be non-mutagenic. Clinical studies of formulations containing 3% cetearyl alcohol showed no signs of irritation or sensitisation, and based on the available data it is concluded that cetearyl alcohol is safe as a cosmetic ingredient in present practices of use.
Ocular tolerability has also been assessed in nine albino rabbits; after instillation and scoring over seven days, a cream containing 3.0% cetearyl alcohol was classified as a non-irritant. A patch test is still recommended, because rash formation has been known to occur at certain concentrations on highly sensitive skin, reflecting individual reactivity rather than any intrinsic hazard.
Two practical points deserve emphasis. Even products labelled "alcohol-free" are allowed to contain cetearyl alcohol and other fatty alcohols, because the claim refers to volatile alcohols such as ethanol, so formulators should write claims carefully. Separately, cetearyl alcohol is biodegradable and does not pose any known environmental hazard.
| Category | Reference Usage Level | Formulation Note |
|---|---|---|
| Hair conditioners | 1-5% | Balance conditioning body against weight on the hair. |
| Hair straightener | 1-5% | Confirm compatibility with the active straightening system. |
| Hair rinse and shampoo | 0.1-1% | Keep the level low where lather quality is the priority. |
| Bath soaps and detergents | 1-5% | Use to add body and opacify while supporting foam. |
| Skin cleansing preparations | 0.1-5% | Confirm skin feel after rinse-off. |
| Moisturising skincare | 1-25% | The widest range; target texture and stability, not the maximum. |
| Eye makeup and face masks | 1-10% | Check ocular tolerability for products used near the eyes. |
| Shaving, after-shave and foundation | 0.1-1% | Use at low levels where a light texture is expected. |
These values are category reference examples published by the Cosmetic Ingredient Review and should not be interpreted as universal legal maximums. Developers should use the current safety assessment and the applicable rules for the intended market and product category.
No. Cetearyl alcohol is a fatty alcohol, a waxy blend of cetyl and stearyl alcohols, and it behaves opposite to volatile short-chain alcohols such as ethanol. Instead of evaporating and leaving skin dry, it remains in the oil phase and helps trap water. Even products labelled alcohol-free are allowed to contain cetearyl alcohol, so claims should reflect that distinction.
Because it is multi-functional. One material provides emolliency, emulsification support, emulsion stabilisation, opacification, viscosity control and some foam boosting, which simplifies the formula. It is also suitable for a wide pH range. The trade-off is that its thickening effect depends on crystallisation during cooling, so process control matters more than for a simple rheology modifier.
Qualification should cover identity, cetyl-to-stearyl ratio, appearance, melting behaviour, moisture and microbiological quality. Because the chain-length distribution strongly affects texture and feel, the composition should be verified against the approved specification rather than accepted on the generic name. For brands relying on plant-derived, vegan or halal claims, feedstock documentation should also be reviewed.
Start from the desired texture and the product category, work within the typical 1-3% guidance for many systems, and add it to the heated oil phase at around 70 °C. Substitute it for part of the heavy butter or emollient load rather than adding it on top, and confirm viscosity, texture and stability in the finished product.
| Identifier | Value | Resource |
|---|---|---|
| Chemical name | Cetyl/stearyl alcohol blend | Technical encyclopedia |
| CAS Number | 67762-27-0 | Chemical dictionary |
| CAS product lookup | 67762-27-0 | Supply search |
| Supplier / trade search | 67762-27-0 | Supplier search |
1. Cosmetic Ingredient Review. Final Report on the Safety Assessment of Cetearyl Alcohol, Cetyl Alcohol and Stearyl Alcohol.
2. European Chemicals Agency. Registered Dossier Information on Cetearyl Alcohol.
3. U.S. Food and Drug Administration. Code of Federal Regulations on fatty alcohols in cosmetic and food use.
4. European Union. Regulation on Cosmetic Products and animal by-products regulations.
5. Healthline. Uses and Information on Cetearyl Alcohol.
6. Cosmetics Info. Ingredient Profile: Cetyl Alcohol.
7. Good Formulations. Benefits of Cetearyl Alcohol in Skincare Products.
8. Personal Care Products Council. International Cosmetic Ingredient Dictionary and Handbook.
9. Journal literature on fatty alcohol emulsification, crystallisation behaviour and sensory performance.
![]() |