-
We detected your language preference as English. Would you like to switch to the English version for a better experience?
Switch to English
Stay here
Chemical Comparison | B2B Procurement Guide
A technical and commercial comparison for procurement, R&D, quality assurance, and formulation teams working with Thiamine HCl and Thiamine mononitrate.
Thiamine mononitrate (CAS 532-43-4) is a ionic/salt-form compound with molecular formula C12H17N5O4S (327.36 g/mol), defined by a primary amine, hydroxyl groups and heterocyclic nitrogen, whereas Thiamine hydrochloride (CAS 67-03-8) is a ionic/salt-form compound with molecular formula C12H18Cl2N4OS (337.3 g/mol), defined by a primary amine, hydroxyl groups, carbon-halogen bonds and heterocyclic nitrogen. The two are distinct entries in purchasing systems and specifications, and the differences below drive how each should be tested, stored and ordered.
On a procurement level the distinction is structural: they share the "thiamine " naming root but not the same molecule and even near-matched molar masses can mask different reactive sites deliver different molar amounts, different impurity landscapes and different handling requirements. Validate the exact identity on every purchase document.
| Comparison Parameter | Thiamine HCl | Thiamine mononitrate |
|---|---|---|
| Identity basis | Discrete molecule: CAS 532-43-4 | Discrete molecule: CAS 67-03-8 |
| CAS Registry Number | 67-03-8 | 532-43-4 |
| Lewis structure guide | Thiamine HCl Lewis structure | Thiamine mononitrate Lewis structure |
| Molecular formula | C12H17N5O4S | C12H18Cl2N4OS |
| Molecular weight | 327.36 g/mol | 337.3 g/mol |
| Polarity & descriptors | TPSA ~142.1 A; logP ~0.37; HBD 2 / HBA 8 | TPSA ~75.9 A; logP ~-1.97; HBD 2 / HBA 5 |
| Chemical class | Ionic/salt-form compound | Ionic/salt-form compound |
| Distinguishing features | a primary amine, hydroxyl groups and heterocyclic nitrogen | a primary amine, hydroxyl groups, carbon-halogen bonds and heterocyclic nitrogen |
| Typical procurement focus | grade, assay, impurity/solvent profile | grade, assay, impurity/solvent profile |
Molecular weights are average molar masses rounded for procurement use; descriptor values (TPSA, logP) are computed and vary slightly with software. Complex materials are controlled by functional grade parameters rather than a single molecular weight.
Thiamine mononitrate is a ionic/salt-form compound defined by molecular formula C12H17N5O4S and average molecular weight 327.36 g/mol; its systematic (IUPAC) name is 2-[3-[(4-amino-2-methylpyrimidin-5-yl)methyl]-4-methyl-1,3-thiazol-3-ium-5-yl]ethanol nitrate. The structure presents a primary amine, hydroxyl groups and heterocyclic nitrogen, and the solid behaves as a crystalline or free-flowing powder in typical commercial grades. Identity in the laboratory rests on orthogonal confirmation — typically spectroscopic (IR or NMR) plus a validated chromatographic method.
Handling and dissolution: as an ionic/salt form, generally water-dispersible with solubility strongly pH-dependent; dry, tightly closed; ambient storage defensible when supported by stability data.
Thiamine hydrochloride is a ionic/salt-form compound defined by molecular formula C12H18Cl2N4OS and average molecular weight 337.3 g/mol; its systematic (IUPAC) name is 2-[3-[(4-amino-2-methylpyrimidin-5-yl)methyl]-4-methyl-1,3-thiazol-3-ium-5-yl]ethanol;chloride;hydrochloride. The structure presents a primary amine, hydroxyl groups, carbon-halogen bonds and heterocyclic nitrogen, and the solid behaves as a crystalline or free-flowing powder in typical commercial grades. Identity in the laboratory rests on orthogonal confirmation — typically spectroscopic (IR or NMR) plus a validated chromatographic method.
Handling and dissolution: as an ionic/salt form, generally water-dispersible with solubility strongly pH-dependent; dry, tightly closed; ambient storage defensible when supported by stability data.
| Property | Thiamine HCl | Thiamine mononitrate |
|---|---|---|
| Diagnostic functionality | A primary amine, hydroxyl groups and heterocyclic nitrogen | A primary amine, hydroxyl groups, carbon-halogen bonds and heterocyclic nitrogen |
| Hydrogen bonding | HBD 2 / HBA 8 | HBD 2 / HBA 5 |
| Polarity & water behavior | As an ionic/salt form, generally water-dispersible with solubility strongly ph-dependent | As an ionic/salt form, generally water-dispersible with solubility strongly ph-dependent |
| Molecular size | 22 heavy atoms, 2 ring(s) | 20 heavy atoms, 2 ring(s) |
| Reactivity flag | N-oxide / salt-form chemistry | N-oxide / salt-form chemistry |
Both terms trace to the same naming root ("thiamine ..."), which is precisely why procurement systems can confuse them. Identity must be fixed by CAS number, molecular formula and an orthogonal confirmatory test — never by name similarity.
Molar-mass implication for formulation
Thiamine mononitrate (327.36 g/mol) and Thiamine hydrochloride (337.3 g/mol) have nearly identical molar masses; equal-mass substitutions therefore deliver almost the same molar amount, but reactive sites, impurity profiles and regulatory status still differ, so conversion calculations must use the identity of the actual material.
Thiamine mononitrate cannot be swapped for Thiamine hydrochloride merely because both appear in the same market segment: identity checks, acceptance numbers and the downstream performance must all be re-validated on the new material.
Thiamine hydrochloride cannot be swapped for Thiamine mononitrate merely because both appear in the same market segment: identity checks, acceptance numbers and the downstream performance must all be re-validated on the new material.
Neither side of this comparison should be assumed fit for pharmaceutical, food-contact, cosmetic or regulated uses on the strength of a general grade name. Each regulated application needs its own evidence: a defined specification, exposure assessment, toxicological or compositional dossier, and a manufacturer willing to support the claim with documentation.
Grade names mean nothing without a defined specification, intended use and documented controls; a certificate image on a quotation does not demonstrate compliance for the application you are buying for.
| Industry / Use | Target Grade | Essential Documentation and Checks |
|---|---|---|
| API or regulated drug-substance use (where applicable) | Applicable pharmacopoeial or justified in-house specification | Current specification and batch certificate, GMP evidence, site details, change control, stability, impurity controls and DMF/CEP status where applicable. |
| Pharmaceutical or fine-chemical intermediate | Process-qualified chemical grade | Identity, assay, related substances, residual solvents, traceability and risk-based qualification under confidentiality where needed. |
| Food, feed or cosmetic ingredient (where listed) | Use-specific qualified grade | Ingredient identity confirmation (INCI/food listing), SDS, specification, contaminants assessment and destination-market regulatory review. |
| Research-grade / laboratory use | Defined research grade with stated limits | Identity and assay, relevant bioburden or endotoxin data only where required, lot consistency and documented suitability for the specified assay. |
| Industrial / technical use | Technical grade matched to process tolerances | Key functional numbers (pH, assay, moisture, viscosity/activity), packaging integrity, and supply reliability rather than compendial language. |
Regulatory note: where a pharmaceutical file (DMF/CEP) or compendial monograph applies, it is referenced by a drug application or certifies scope-limited conformity respectively; neither is general proof of quality for research or industrial purchase.
Review the actual methods, reporting limits and acceptance criteria behind every certificate line, selected against the production route and intended use — a generic report tests neither every listed impurity nor every relevant risk.
| QC Attribute | Thiamine HCl: Audit Focus | Thiamine mononitrate: Audit Focus | Recommended Verification |
|---|---|---|---|
| Identity | the correct molecular structure (CAS 532-43-4) | the correct molecular structure (CAS 67-03-8) | Orthogonal identity methods such as FTIR plus a validated chromatographic or spectrometric method, or the marker test named in the specification. |
| Assay & related substances | related regioisomers and dehalogenated/oxidized analogs where the route uses halogenated heterocycles | related regioisomers and dehalogenated/oxidized analogs where the route uses halogenated heterocycles | Validated assay with reporting limit, impurity identification and quantitation justified by route or process. |
| Residual solvents / process residues | solvents actually used in synthesis, crystallization and drying | solvents actually used in synthesis, purification and drying | Headspace GC-FID or GC-MS against ICH Q3C limits plus a process-specific solvent risk assessment. |
| Water and inorganic residue | water content, sulfated ash/residue on ignition, counterion balance where ionic | water content, sulfated ash/residue on ignition, counterion balance where ionic | Karl Fischer where appropriate; compendial or validated residue test. |
| Elemental impurities | risk-based metals from catalysts, reagents and equipment | risk-based metals from catalysts, reagents and equipment | ICP-MS/ICP-OES where risk assessment and applicable standards warrant testing. |
| Microbiological / allergen quality | as required by intended application | as required by intended application | Bioburden, endotoxin, pathogen or allergen controls only where justified by the intended use and product specification. |
For regulated purchase, ICH Q3C governs solvent residues: Class 1 solvents (e.g., benzene) should be avoided unless justified and controlled; Class 2 solvents (methanol, acetonitrile, dichloromethane, THF) carry permitted-daily-exposure limits. The correct panel is route-determined — demand a process-based solvent declaration and verify by validated headspace GC.
Process impurities follow the same logic: carryover from earlier steps appears only where the route was disclosed, so the impurity list is a negotiation document, not a formality.
These are risk-based audit targets, not claims about any specific lot; the producer’s validated methods and limits govern.
Procurement warning: a shared "thiamine " naming root invites substitution errors.
A high-purity lot of the wrong side can arrive when the process actually required the other; quotation review and master-data entry skim over the difference, producing a wrong molar charge, a failed assay or a formulation that cannot perform.
Prevention: put the exact name, identifier (CAS where applicable), grade, specification and intended application on the PO; at incoming inspection reconcile label, certificate, identity test and material master. Never release on a single attribute.
Manufacturing origin alone does not establish capability, compliance or reliability. Qualify the actual production site and distinguish it from a distributor, exporter or repackaging location.
Qualify a second source only after comparing descriptions, methods, impurity/marker profiles, packaging and lead times: a supplier change can alter exactly the characteristics this comparison warns about.
| Control | Procurement Recommendation |
|---|---|
| Primary packaging | Supplier-qualified, tightly closed containers compatible with the material and destination use: HDPE or glass where moisture/light justification exists, with validated liners and tamper-evident closures. |
| Moisture and light | Follow documented protection requirements; do not infer amber-glass or desiccant needs without stability justification. |
| Temperature | Use the specification/label storage range; excursion tolerance should rest on stability data, not on habit. |
| Traceability | Sealed original packaging, batch identification, shipping-condition records where specified, and a documented excursion assessment; for sterile or biologically sensitive uses, qualify additional controls separately. |
Include the following in every request for quotation to reduce mismatches and qualification delays.
B2B Chemical Sourcing
Compare suppliers, request quotations and evaluate batch documentation before committing to a purchase. Fix the identifier and required grade first, then qualify the supplier against your technical and regulatory requirements.
Request current certificates, specifications, impurity methods and regulatory documents directly from shortlisted suppliers. Availability and listing details must be independently verified.
Start with orthogonal identity: FTIR (or NMR for structural disputes) plus a validated chromatographic method; matching one attribute is not matching identity. A conventional C18 reversed-phase system is a common starting point for UV-absorbing molecules — verify retention, resolution, linearity and system suitability rather than trusting a borrowed method — and the final acceptance rule is written in your specification, not in the catalog listing.
Record the decision on the material master with CAS numbers and molecular formulas, so the next purchase order cannot silently switch entries.
No — and the arithmetic proves it. At matched mass concentration the molar amounts differ by the MW ratio (327.36 vs 337.3 g/mol); at matched molarity the mass of each material differs. Reactive sites, impurity behavior and regulatory identity also differ, so a swap requires full re-validation: assay, compatibility, stability and the downstream performance test.
Where a single document mixes the two names, expect the audit to treat it as an identity deviation.
Use the documented label range and packaging spec as the baseline; dry, tightly closed; ambient storage defensible when supported by stability data, apply to the substance side. Treat nitrogen, cold chain and amber containers as claims to be evidenced by stability data, not defaults to be purchased.
Record excursion handling in the shipping agreement: what is acceptable, what is reportable, and what voids acceptance.
A current certificate of analysis from the actual manufacturing site (not a template), the specification with methods and limits, the safety data sheet for the destination market, and identity confirmation by an orthogonal test. For regulated uses add the relevant registration, listing or dossier authorization and a change-notification commitment in writing.
Confirm that the documents cover the exact material, grade and site you are buying; certificates that describe a sister product are the most common near-miss in this comparison.
Editorial and compliance note
This article provides technical and procurement guidance, not a substitute for an approved product specification, regulatory assessment or validated analytical procedure. Cited databases support identification; they do not independently establish a supplier’s grade, compliance status, batch purity or commercial availability. Verify all certificates, listings and current requirements before purchase or publication.
 |
 |
 |
EN
Agricultural News
Food News
Industrial News
Cosmetic News
Pharmaceutical News
Science News
3YRS
